deenfresitcntr
WDGA 58B SSI

Absolute shaft encoder, magnetic, SSI WDGA 58B
Clamping flange;
Housing: Ø 58 mm

16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm / Ø 10 mm
binary or gray code

Data sheetGeneral technical data absolute encoders SSI (PDF 640 kB)
Drehgeber WDGA58BSSI
Highlights
  • EnDra multiturn technology: maintenance-free and environmentally friendly
  • Compact industrial model
  • Interface: SSI (Synchronous-serial Interface)
  • Code: Binary- or Gray
  • Preset input
  • Direction of counting changeable
  • Status indicator LED
  • EMC: EN 61000-6-2, EN 61000-6-3
Product details
Flange
clamping flange
Housing
Ø 58 mm
stainless steel (except connector: CH8 and C5 = chrome-plated steel housing, magnetic shielding)
Resolution
Single-turn Resolution

up to 65,536 steps/360° (16 bit)

Multi-turn Resolution

up to 43 bit.

Shaft
Ø 6 mm
Advice: Attention: No option AAS = full IP67 version
Shaft length: L: 12 mm
Max. Permissible shaft loading radial: 125 N
Max. Permissible shaft loading axial: 120 N
Ø 10 mm
Shaft length: L: 20 mm
Max. Permissible shaft loading radial: 220 N
Max. Permissible shaft loading axial: 120 N
Max. operating speed
8000 rpm
Power supply
4,75 VDC up to 32 VDC
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
4,75 VDC up to 5,5 VDC
Current consumption: typ. 80 mA
Power consumption: max. 0.44 W
Operating temperature
-40 °C up to +85 °C
Storage temperature
-40 °C up to +100 °C
Protection class
Housing: IP65, IP67; shaft sealed: IP65; cable outlet K1: IP40, K6: IP20
STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
L2axial, shield connected to encoder housing
Assignments
GNDWH
(+) VccBN
SSI CLK+GN
SSI CLK-YE
SSI DATA+GY
SSI DATA-PK
PRESETBU
DIRRD
Shieldhousing
STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
L3radial, shield connected to encoder housing
Assignments
GNDWH
(+) VccBN
SSI CLK+GN
SSI CLK-YE
SSI DATA+GY
SSI DATA-PK
PRESETBU
DIRRD
Shieldhousing
STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
K1radial, shield not connected
Assignments
GNDWH
(+) VccBN
SSI CLK+GN
SSI CLK-YE
SSI DATA+GY
SSI DATA-PK
PRESETBU
DIRRD
Shieldhousing n. c.
STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
CB8axial, 8-pin, shield connected to encoder housing
Assignments
GND1
(+) Vcc2
SSI CLK+3
SSI CLK-4
SSI DATA+5
SSI DATA-6
PRESET7
DIR8
Shieldhousing
STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
CC8radial, 8-pin, shield connected to encoder housing
Assignments
GND1
(+) Vcc2
SSI CLK+3
SSI CLK-4
SSI DATA+5
SSI DATA-6
PRESET7
DIR8
Shieldhousing
STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
CH8radial, 8-pin, shield connected to encoder housing
Assignments
GND2
(+) Vcc1
SSI CLK+6
SSI CLK-5
SSI DATA+4
SSI DATA-3
PRESET8
DIR7
Shieldhousing
STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
C5radial, 12-pin, shield connected to encoder housing
Assignments
GND12
(+) Vcc11
SSI CLK+2
SSI CLK-1
SSI DATA+3
SSI DATA-4
PRESET9
DIR8
Shieldhousing
General technical Data and safety instructions absolute encoders WDGA SSI
General technical Data and safety instructions absolute encoders WDGA SSI

Handout Absolute encoders WDGA
Handout Absolute encoders WDGA

  • Absolute encoders with flange Ø 36 mm / Ø 58 mm
  • Single-/Multiturn (16/43)
  • Ground-breaking technology 32 Bit processor
  • Very high shaft loading, IP67
  • EnDra® Multiturn technology: No gears, no battery
  • QuattroMag® Singleturn technology: High precision +/- 0,0878°

Short-Catalogue Encoders and systems
Short-Catalogue Encoders and systems

  • Incremental and absolute encoders
  • Digital shaft copying
  • Made in Germany
  • Motorfeedback
  • Position Measurement Systems

Automated guided vehicle
Automated guided vehicle

Precise movements

HALT Test
The HALT-Test

Delivery times and service
Delivery times and service

of Wachendorff Automation GmbH & Co. KG

Assembly instructions for WDGA absolute encoder SS
Assembly instructions for WDGA absolute encoder SSI

Technical Note deutsch
Technical Note WDGA SSI Basics

deutsch

Technical Note english
Technical Note WDGA SSI Basics

english

EC Konformitätserklärung Drehgeber : EC declaration of conformity encoder
EU declaration of conformity absolute encoder WDGA 2.0 CAN/SSI

for Wachendorff Automation GmbH & Co. KG.

UL Certificates for Wachendorff Automation Products 2014-03-28
UL Certificates

for Wachendorff Automation products.

REACH regulation
REACH- and RoHS regulation of the EU

Information

ISO Zertifikat DIN EN 9001:2015
ISO Certificate DIN EN 9001:2015

WDG053XIOM

SSI display unit for absolute encoders WDGA SSI with
Singleturn or Multiturn

with 4 presets and outputs

KI867SSI Drehgeber Kabeldose
KI-8-67-SSI

Female connector KI-8-67-SSI:
Suitable for encoder absolute WDGA SSI
with connector outlet CB8 and CC8, 8 pin, IP67

Ready-made shielded connection cable
with female cable connector straight, shield connected.

KIA867SSI Drehgeber Kabeldose
KIA-8-67-SSI

Female connector KIA-8-67-SSI:
Suitable for encoder absolute WDGA SSI
with sensor connector outlet CB8 and CC8, 8 pin, IP67.

Ready-made shielded connection cable
with female cable connector angular, shield connected.

KD867SSI Drehgeber Kabeldose
KD-8-67-SSI

Female connector KD-8-67-SSI:
Suitable for encoder absolute WDGA SSI
with connector outlet CH8, 8 pin, IP67

Straight female connector or
straight female connector with ready made cable.

KDA867SSI Drehgeber Kabeldose
KDA-8-67-SSI

Female connector KDA-8-67-SSI:
Suitable for encoder with connector outlet CH8, 8 pin, IP67

Angular female connector or
angular connector with ready made cable.
Insert any mountable.

KD1267SSI Drehgeber Kabeldose
KD-12-67-SSI

Female connector KD-12-67-SSI:
Suitable for encoder absolute WDGA SSI
with connector outlet C5, 12 pin, IP67

Straight female connector or
straight connector with ready made cable.

KDA1267SSI Drehgeber Kabeldose
KDA-12-67-SSI

Female connector KDA-12-67:
Suitable for encoder absloute WDGA SSI
with connector outlet C5, 12 pin, IP67

Angular female connector or
angular connector with ready made cable.
Insert any mountable.

MW58B Drehgeber Montagewinkel
MW58B

Mounting angle MW58B

suitable for inkremental encoder WDGI 58B, 58K, 58D, 58N, WDG 58T and
absolute encoder WDGA 58B, WDGA 58D.

 STEP-download MW58B

QF58B Drehgeber Quadratflansch
QF58B

Square flange QF58B

suitable for incremental encoder WDGI 58B, 58K, 58D, 58N, WDG 58T and
absolute encoder WDGA 58B, WDGA 58D.

Montagewinkel WDGQF58B04
WDGQF58B04

Square flange WDGQF58B04

suitable for incremental encoder WDGI 58B, 58K, 58D, 58N, WDG 58T and
absolute encoder WDGA 58B, WDGA 58D.

SP300 Drehgeber Spannexzenter
SP-3-00

Clamping claw SP-3-00

suitable for incremental encoder WDG 40A, 50B, 58T, WDGI 58A, 58B, 58C, 58D, 58K, 63B, WDGP 36A, WDGP 58A, WDGP 58B and absolute encoder WDGA 36A, WDGA 58A, WDGA 58B.

ST27 Kupplung Drehgeber
ST27

Jointed coupling ST27

for encoder with shaft Ø 6 mm or 10 mm

PK20 Kupplung Drehgeber
PK20

Slit coupling PK20

for encoder with shaft Ø 6 mm.

PK24 Kupplung Drehgeber
PK24

Slit coupling PK24

for encoder with shaft Ø 6 mm, 8 mm or 10 mm.

FSK22 Kupplung Drehgeber
FSK22

Spring disc coupling FSK22

for encoder with shaft Ø 6 mm, 10 mm or 12 mm.

WK22 Kupplung Drehgeber
WK22

Helical coupling WK22

for encoder with shaft Ø 6 mm.

WK24 Kupplung Drehgeber
WK24

Helical coupling WK24

for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm.

WK32 Kupplung Drehgeber
WK32

Helical coupling WK32

for encoder with shaft Ø 6 mm or 10 mm.

BK29 Kupplung Drehgeber
BK29

Bellows coupling BK29

for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm*.
Max. offset of shafts radial: ± 0,25 mm or ± 0,30 mm*
Torsion spring stiffness: 150 Nm/rad or 130 Nm/rad*

FB29B Kupplung Drehgeber
FB29B

Bellows coupling FB29B

for encoder with shaft Ø 4 mm, 6 mm, 8 mm, 10 mm or 12 mm.

DSK29 Kupplung Drehgeber
DSK29

Double loop coupling DSK29

for encoder with shaft Ø 6 mm, 8 mm or 10 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

 STEP Download DSK290610

DSK38 Kupplung Drehgeber
DSK38

Double loop coupling DSK38

for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

STEP download DSK380606

DSK48 Kupplung Drehgeber
DSK48

Double loop coupling DSK48

for encoder with shaft Ø 10 mm, 12 mm or 14 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

STEP download DSK481012

The encoder WDG 58B SSI can be supplied in a full IP67 version.
Max. RPM:                        3500 min'-1 
Permitted Shaft-Loading:  axial 100 N; radial 110 N
Starting-torque:                 approx. 4 Ncm at ambient temperature

distributors
For further information please contact our local distributor.
Here you find a list of our distributors worldwide
You want to get an offer or want a recall. Request