Encoder configurator / Product finder
For advice " from person to person "
Please contact your local distributor. Distributors worldwide
How to configure your encoder type and get the specific data sheet:
(1) When you click on "Details" of the rotary encoder type, our configurator stores your configured data.
(2) This means that you can continue configuring your selected rotary encoder type at product level (in the "Configurator" tab) Iand generate a data sheet corresponding to your configuration at any time.
Shaft Encoder incremental,
resolution up to 16384 ppr,
Servo flange: Ø 36 mm,
Protection rating: IP67 + IP69K,
(high pressure / steam cleaning)
High shaft load: 300 N axial / radial
Shaft: Ø 10 mm,
Signal shape: square-wave,
Selectable: Set zero pulse,
TTL/RS422 output possible at 10-32 VDC,
Operating principle: magnetic.
Incremental shaft encoder via Smartphone (NFC) configurable,
Servo flange: Ø 36 mm,
Protection rating: IP67 + IP69K,
(high pressure / steam cleaning)
High shaft load: 300 N axial / radial
Shaft: Ø 10 mm,
resolution up to 16384 ppr and HTL/TTL via NFC configurable,
Signal shape: square-wave,
Operating principle: magnetic.
Hollow bore (blind) encoder configurable via Smartphone (NFC) incremental quadrature,
Housing: Ø 36 mm
Hollow bore blind: Ø 12 mm, Ø 14 mm, Ø 15 mm,
Ø 8, 10 mm with adapter sleeve;
resolution up to 16384 ppr and HTL/TTL configurable via NFC,
Signal shape: square-wave,
Operating principle: magnetic.
Hollow Bore (blind) Encoder incremental,
Resolution: up to 25000 ppr,
Hollow Bore (blind) Encoder: bore size 15 mm
WDGI 58E: Ø 58 mm
Bore size: Ø 8, 10, 12, 15 mm, H7,
Ø 6, 6.35 (1/4''), 7, 9.525 mm (3/8'') with adapter sleeve;
Protection rating: IP67, shaft sealed to IP65,
Signal shape: square-wave or sine/cosine,
Operating principle: optical.
Hollow bore (blind) encoder,
Resolution: up to 16384 ppr,
Housing: Ø 58 mm
Hollow bore blind: Ø 12 mm, Ø 14, Ø 15 mm,
Ø 6, 6.35 (1/4''), 7, 8, 9.525 mm (3/8'') 10 mm with adapter sleeve,
Signal shape: square-wave,
Selectable: Set zero pulse,
TTL/RS422 output possible at 10-32 VDC,
Operating principle: magnetic.
Shaft Encoder configurable via Smartphone (NFC)
incremental quadrature,
Housing: Ø 58 mm
Hollow bore blind: Ø 12 mm, Ø 14, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 mm (3/8''), 10 mm with adapter sleeve;
resolution up to 16384 ppr and HTL/TTL configurable via NFC,
Signal shape: square-wave,
Operating principle: magnetic.
Thru-Bore Encoder incremental,
Resolution: up to 20,480 PPR,
WDG 100I: Ø 100 mm
Balanced stainless steel clamping ring,
Bore size with insulating sleeve: Ø 25, 25.4 (1"), 30, 32, 38, 40, 42 mm,
Protection rating: up to IP55 all around,
Signal shape: square-wave or sine/cosine,
Operating principle: optical.
Absolute hollow bore (blind) encoder CANopen WDGA 36E
Housing: Ø 36 mm
16/43-bit Single-turn/Multi-turn;
Hollow bore blind: Ø 12 mm, Ø 14 mm, Ø 15 mm,
Ø 8 mm, Ø 10 mm with adapter sleeve;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder CANopen WDGA 36J
Protection rating: IP67 + IP69K,
(high pressure / steam cleaning)
High shaft load: 300 N axial / radial
Servo flange;
Housing: Ø 36 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder CANopen WDGA 58A
Galvanic isolation
Synchro flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8"
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder CANopen WDGA 58B
Galvanic isolation;
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Communication Profile according to CiA 301;
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder CANopen WDGA 58D
Galvanic isolation;
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm;
High shaft load: radial 500 N, axial 500 N;
Communication Profile according to CiA 301;
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute hollow bore (blind) encoder CANopen WDGA 58E
Housing: Ø 58 mm
16/43 Single-turn/Multi-turn;
hollow bore blind: Ø 12 mm, Ø 14, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute hollow bore (blind) encoder,
CANopen WDGA 58E
Galvanic isolation
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
hollow bore: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder CANopen WDGA 58S,
Salt mist IEC 60068-2-11
High pressure / steam cleaning
Corrosion resistance
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder CANopen WDGA 58V
Especially for food and beverage industry
Acid- and alkaline resistance
High pressure / steam cleaning
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder WDGA 58A
CANopen LIFT galvanic isolation
Synchro flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8"
Communication Profile according to CiA 301
Application Profile CANopen Lift CiA 417;
binary code
Absolute shaft encoder WDGA 58B;
CANopen LIFT Galvanic isolation;
with connector D-SUB, 9-pin;
Clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Communication Profile according to CiA 301
Application Profile CANopen Lift CiA 417;
binary code
Absolute shaft encoder WDGA 58D
CANopen LIFT galvanic isolation;
Heavy duty;
Clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm;
High shaft load: radial 500 N, axial 500 N;
Communication Profile according to CiA 301
Application Profile CANopen Lift CiA 417;
binary code
Absolute hollow bore (blind) encoder
CANopen Lift WDGA 58E
Housing: Ø 58 mm
16/32 Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Communication Profile according to CiA 301
Device Profile for encoder CiA 417 V2.0;
binary code
Absolute hollow bore (blind) encoder,
CANopen LIFT WDGA 58E
Galvanic isolation
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Communication Profile according to CiA 301
Application Profile CANopen Lift CiA 417;
binary code
Absolute shaft encoder IO-Link WDGA 36J
Protection rating: IP67 + IP69K,
(high pressure / steam cleaning)
High shaft load: 300 N axial / radial
Servo flange;
Housing: Ø 36 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm;
Device Profile for encoder Smart Sensor Profile (SSP);
binary code
Absolute shaft encoder,
PROFIBUS-DP WDGA 58A
Bus cover: connection clamps or 3x M12 connector
Synchro flange;
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: PROFIBUS-DPV2;
Device Profile: switchable, Class 3, 4;
Line-Driver: galvanic isolated
Absolute shaft encoder,
PROFIBUS-DP WDGA 58B
Bus cover: connection clamps or 3x M12 connector
Clamping flange;
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: PROFIBUS-DPV2;
Device Profile: switchable, Class 3, 4;
Line-Driver: galvanic isolated
Absolute shaft encoder,
PROFIBUS-DP WDGA 58D
Heavy Duty;
Bus cover: connection clamps or 3x M12 connector;
Clamping flange;
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm;
High shaft load: radial 500 N, axial 500 N;
Protocol: PROFIBUS-DPV2;
Device Profile: switchable, Class 3, 4;
Line-Driver: galvanic isolated
Absolute shaft encoder,
PROFIBUS-DP WDGA 58D
Heavy Duty
Connection: connector
Clamping flange;
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm;
High shaft load: radial 500 N, axial 500 N;
Protocol: PROFIBUS-DPV2;
Device Profile: switchable, Class 3, 4;
Line-Driver: galvanic isolated
Absolute hollow bore (blind) encoder,
PROFIBUS-DP WDGA 58E
Bus cover: connection clamps
or 3x M12 connector
hollow bore (blind);
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Protocol: PROFIBUS-DPV2;
Device Profile: switchable, Class 3, 4;
Line-Driver: galvanic isolated
Absolute shaft encoder,
PROFIBUS-DP WDGA 58E
Connection: connector
hollow bore (blind);
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Protocol: PROFIBUS-DPV2;
Device Profile: switchable, Class 3, 4;
Line-Driver: galvanic isolated
Absolute shaft encoder,
PROFINET-IO WDGA 58D
Heavy Duty;
Bus cover: connection 3x M12 connector;
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm;
High shaft load: radial 500 N, axial 500 N;
Protocol: PROFINET-IO (CC-C);
Device Profile: switchable, Class 3, 4
Absolute hollow bore (blind) encoder,
PROFINET-IO WDGA 58E
Bus cover: 3x M12 connector
hollow bore (blind);
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Protocol: PROFINET-IO (CC-C);
Device Profile: switchable, Class 3, 4
Absolute shaft encoder,
PROFINET-IO WDGA 58F
The most compact PROFINET encoder worldwide!
Bus cover: connection 3x M12 connector
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: PROFINET-IO (CC-C);
Device Profile: switchable, Class 3, 4
Absolute hollow bore (blind) encoder,
EtherNet/IP WDGA 58E
Bus cover: 3x M12 connector
hollow bore (blind);
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Protocol: EtherNet/IP™
Classes: Position Sensor, DLR
Absolute shaft encoder,
EtherNet/IP WDGA 58F
The most compact EtherNet/IP encoder worldwide!
Bus cover: connection 3x M12 connector
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: EtherNet/IP™
Classes: Position Sensor, DLR
Absolute shaft encoder,
EtherCAT WDGA 58D
Heavy Duty;
Bus cover: connection 3x M12 connector;
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm;
High shaft load: radial 500 N, axial 500 N;
Protocol: EtherCAT;
Device Profile: CiA DS-406 V4.0.2, Class 3
Absolute hollow bore (blind) encoder,
EtherCAT WDGA 58E
Bus cover: 3x M12 connector
hollow bore (blind);
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Protocol: EtherCAT;
Device Profile: CiA DS-406 V4.0.2, Class 3
Absolute shaft encoder,
EtherCAT WDGA 58F
The most compact EtherCAT encoder worldwide!
Bus cover: connection 3x M12 connector
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: EtherCAT;
Device Profile: CiA DS-406 V4.0.2, Class 3
Absolute shaft encoder,
Universal IE WDGA 58D
Heavy Duty;
Bus cover: connection 3x M12 connector;
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm
High shaft load: radial 500 N, axial 500 N
Protocol: selectable
(PROFINET-IO, EtherNet/IP, EtherCAT)
Absolute hollow bore (blind) encoder,
Universal IE WDGA 58E
Bus cover: 3x M12 connector
hollow bore (blind);
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Protocol: selectable
(PROFINET-IO, EtherNet/IP, EtherCAT)
Absolute shaft encoder,
Universal IE WDGA 58F
The most compact Universal IE encoder worldwide!
Bus cover: connection 3x M12 connector
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: selectable
(PROFINET-IO, EtherNet/IP, EtherCAT)