Shaft Encoder, incremental,
resolution: up to 1024 ppr,
Synchro flange: Ø 24 mm [0.945"],
Shaft: Ø 6 mm [0.236"],
protection rating: up to IP67 all around,
Signal shape: square-wave,
Operating principle: magnetic.
- very compact construction for use in harsh conditions
- permissible bearing loads similar to our “big encoders”
- up to IP67 all around
- Hall effect based signal generation
Shaft length: L: 12 mm [0.472"]
Max. Permissible shaft loading radial: 80 N [8.157 kp]
Max. Permissible shaft loading axial: 50 N [5.098 kp]
Current consumption: typ. 40 mA
Current consumption: typ. 40 mA
Environmental data
ESD (DIN EN 61000-4-2):
8 kV
Burst (DIN EN 61000-4-4):
2 kV
includes EMC:
DIN EN 61000-6-2
DIN EN 61000-6-3
Vibration:
(DIN EN 60068-2-6)
50 m/s2 (10 Hz up to 2000 Hz)
Shock:
(DIN EN 60068-2-27)
1000 m/s2 (6 ms)
Electrial Safety:
according DIN VDE 0160
Duty information
Customs tariff number:
90318020
Country of origin:
Germany
| Description | ABN inv. poss. | |
|---|---|---|
| K7 | radial, shield not connected (IP40) | ● |
| L7 | radial, shield connected to encoder housing (IP40) | ● |
| K7, L7 | K7, L7 | |
| Circuit | N05, N30 | M05, M30 |
| GND | WH | WH |
| (+) Vcc | BN | BN |
| A | GN | GN |
| B | YE | YE |
| N | GY | GY |
| - | - | - |
| A inv. | - | RD |
| B inv. | - | PK, (BK at ACA) |
| N inv. | - | BU, (VT at ACA) |
| Shield | flex | flex |
| Description | ABN inv. poss. | |
|---|---|---|
| SK6 | axial, 6-pin, Connector connected to encoder housing | - |
| Description | ABN inv. poss. | |
|---|---|---|
| SK8 | axial, 8-pin, Connector connected to encoder housing | ● |
16, 32, 64 PPR
1-1024 PPR
| Max. RPM: | 3500 rpm |
| Permitted Shaft-Loading, axial: | 30 N [3.059 kp] [3.059 kp] |
| Permitted Shaft-Loading, radial: | 45 N [4.589 kp] [4.589 kp] |
| Max. PPR: | 1024 ppr |
| Starting-torque: | approx. 1.2 Ncm [1.699 in-ozf] at ambient temperature [approx. 1.699 in-ozf at ambient temperature] |
With output circuit M30 and N30 max. 25 m. The maximum cable length depends on the supply voltage and the frequency; see 'General Technical Data'
Please extend the standard order code with a three figure number, specifying the cable length in decimetres.
Example: 5 m cable = 050
- Incremental and absolute encoders
- Digital shaft copying
- Made in Germany
- Motorfeedback
- Position Measurement Systems
Download (4.27 MB)
Female connector SAK-6-67:
Suitable for encoder with connector outlet SK, 6 pin, IP67
Straight connector with ready made cable.
With female thread M8.
Female connector SAK-8-67:
Suitable for encoder with connector outlet SK, 8 pin, IP67
Straight connector with ready made cable.
With female thread M8.
Bellows coupling BK29
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm*.
Max. offset of shafts radial: ± 0,25 mm or ± 0,30 mm*
Torsion spring stiffness: 150 Nm/rad or 130 Nm/rad*
Double loop coupling DSK29
for encoder with shaft Ø 6 mm, 8 mm or 10 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.
Double loop coupling DSK38
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.
Measuring wheels MRA200KR
Circumference 200 mm,
Surface finish: Metal, knurled
Fields of application: Pasteboard, wood, textiles, rubber, soft plastic.
For encoder with shaft Ø 6 mm, Ø 10 mm or Ø 12 mm.
Measuring wheels MR200KH
Circumference 200 mm,
Surface finish: Synthetic (Hytrel, even)
Fields of application: Plastic, painted surfaces, paper, pasteboard, wood, metal, textiles.
For encoder with shaft Ø 6 mm or 10 mm.
Measuring wheels MRA200KH
Circumference 200 mm,
Surface finish: Synthetic (Polyurethan, even)
Fields of application: greased metal, steal profiles, painted surfaces, plastic, paper, pasteboard, wood, textiles, wire, leather.
For encoder with shaft Ø 6 mm, Ø 10 mm or Ø 12 mm.
Measuring wheels MRA200NG
Circumference 200 mm,
Surface finish: Synthetic (pimpled Polyurethan)
Fields of application: rough textiles, carpet, cable measuring, fleece, paper, pasteboard, wood, plastic.
For encoder with shaft Ø 6 mm, Ø 10 mm or Ø 12 mm.
Measuring wheels MR200KG
Circumference 200 mm,
Surface finish: Synthetic (Hytrel, fluted)
Fields of application: Plastic, painted surfaces, paper, pasteboard, wood, metal, textiles.
For encoder with shaft Ø 6 mm or 10 mm.
Measuring wheels MRA200KG
Circumference 200 mm,
Surface finish: Synthetic (Polyurethan, fluted)
Fields of application: metal ungreased, painted surfaces, plastic, paper, pasteboard, wood, textiles, glas, floor coverings.
For encoder with shaft Ø 6 mm, Ø 10 mm or Ø 12 mm.
Here you find a list of our distributors worldwide
to top
Contact
Request form
