Absolute shaft encoder, magnetic, RS485 WDGA 36J
Protection rating: IP67 + IP69K,
(high pressure / steam cleaning)
High shaft load: 300 N axial / radial
Servo flange;
Housing: Ø 36 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm;
CRC checksum
- EnDra multiturn technology: maintenance-free and environmentally friendly
- Compact industrial model
- Interface: RS485
- Preset input
- Direction of counting changeable
- Status indicator LED
- EMC: EN 61000-6-2, EN 61000-6-3
up to 65,536 steps/360° (16 bit)
Multi-turn Resolutionup to 32 bit.
Shaft length: L: 20 mm
Max. Permissible shaft loading radial: 300 N
Max. Permissible shaft loading axial: 300 N
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
Current consumption: typ. 80 mA
Power consumption: max. 0.44 W
| Description | |
|---|---|
| L2 | axial, shield connected to encoder housing |
| S- (GND) | WH |
| S+ (DCin) | BN |
| A (DATA+) | GY |
| B (DATA-) | PK |
| PRESET | BU |
| DIR | RD |
| Shield | housing |
| Description | |
|---|---|
| L3 | radial, shield connected to encoder housing |
| S- (GND) | WH |
| S+ (DCin) | BN |
| A (DATA+) | GY |
| B (DATA-) | PK |
| PRESET | BU |
| DIR | RD |
| Shield | housing |
Your desired STEP file is not listed:
Request STEP file here
| Description | |
|---|---|
| CB8 | axial, 8-pin, shield connected to encoder housing |
Your desired STEP file is not listed:
Request STEP file here
| Description | |
|---|---|
| CC8 | radial, 8-pin, shield connected to encoder housing |
...to be directly installed in motors.
Download (742 KB)
- Absolute encoders with flange Ø 36 mm / Ø 58 mm
- Single-/Multiturn (16/43)
- Ground-breaking technology 32 Bit processor
- Very high shaft loading, IP67
- EnDra® Multiturn technology: No gears, no battery
- QuattroMag® Singleturn technology: High precision +/- 0,0878°
Download (767 KB)
- Incremental and absolute encoders
- Digital shaft copying
- Made in Germany
- Motorfeedback
- Position Measurement Systems
Download (3.77 MB)
Female connector KI-8-67-EIA:
Suitable for encoder absolute WDGA RS485
with connector outlet CB8 and CC8, 8 pin, IP67
Ready-made shielded connection cable
with female cable connector straight, shield connected.
Female connector KIA-8-67-EIA:
Suitable for encoder absolute WDGA RS485
with sensor connector outlet CB8 and CC8, 8 pin, IP67
Ready-made shielded connection cable
with female cable connector angular, shield connected.
Bellows coupling BK29
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm*.
Max. offset of shafts radial: ± 0,25 mm or ± 0,30 mm*
Torsion spring stiffness: 150 Nm/rad or 130 Nm/rad*
Double loop coupling DSK29
for encoder with shaft Ø 6 mm, 8 mm or 10 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.
Double loop coupling DSK38
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.
Here you find a list of our distributors worldwide
up
Contact
Request form
