deenfresitcntr
WDGA 58S CANopen

Absolute shaft encoder, magnetic, CANopen WDGA 58S,
Salt mist IEC 60068-2-11
High pressure / steam cleaning

Corrosion resistance
Clamping flange;
Housing: Ø 58 mm

16/43-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code

Data sheetGeneral technical data absolute encoders CANopen (PDF 619 kB)
Drehgeber WDGA58SCAN
Highlights
  • Resistance to salt mist (IEC 60068-2-11) succeeded
  • Protection: IP67 + IP69k (high pressure / steam cleaning)
  • Corrosion resistance
  • EnDra®: maintenance-free and environmentally friendly
  • CANopen, Single-turn/Multi-turn
  • Communication Profile according to CiA 301
  • Device Profile for encoder CiA 406 V3.2 class C2
  • Single-turn/Multi-turn (16 bit/43 bit)
  • Forward-looking technology with 32 Bit processor
  • 2-colour-LED as indicator for operating condition and
    error message appropriate CiA 303-3
Product details
Flange
clamping flange
Housing
Ø 58 mm
steel case chrome-plated, magnetic shielding
Resolution
Single-turn Resolution

65,536 steps/360° (16 bit)

Multi-turn Resolution

up to 32 bit with high precision value up to 43 bit.

Shaft
Ø 10 mm
Shaft length: L: 18 mm
Max. Permissible shaft loading radial: 100 N
Max. Permissible shaft loading axial: 100 N
Max. operating speed
3600 rpm
Power supply
10 VDC up to 32 VDC
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
Operating temperature
-40 °C up to +85 °C
Storage temperature
-40 °C up to +100 °C
Protection class
IP67 all around and IP69K
Advice

LED signaling
 Demonstration of the LED status signaling

Configuration software
 Software download

Manual WDGA CANopen
 Manual WDGA CANopen


Your desired STEP file is not listed:
Request STEP file here

Description
CB5axial, 5-pin, shield connected to encoder housing
Assignments
(+) Vcc2
GND3
CANHigh4
CANLow5
CANGND shield1
BGZ0000KIT-ZVK

Starter kit CANopen

for absolute encoder WDGA

WDG043ACOM
WDG043ACOM

Display Unit / and BCD Thumbwheel Switchset with
CANopen Interface

The WDG043ACOM display units have been designed to display single
parameters or registers (like position or speed) in systems using a CANopen
network for communication.

CANUSBANALYZER Drehgeber Absolut CANopen
CANUSBANALYZER

PEAK CAN-USB-Analyzer

for absolute encoder WDGA

The encoder WDGA 58S CANopen is also available with fixed 120 Ohm terminating resistor.

distributors
For further information please contact our local distributor.
Here you find a list of our distributors worldwide
You want to get an offer or want a recall. Request