Absolute encoder, magnetic, CAN SAE J1939 WDGA 36E
hollow bore (blind)
Housing: Ø 36 mm
16/32-bit Single-turn/Multi-turn;
Hollow bore (blind): Ø 8, 10, 12, 14, 15 mm

- EnDra® Multiturn Technology: maintenance-free and environmentally friendly
- CAN SAE J1939 protocol
- Forward-looking technology with 32 Bit processor
- 2-colour-LED as indicator for operating condition
65.536 steps/360° (16 bit)
Multi-turn Resolutionup to 32 bit
Insertion depth min.: 10 mm
Insertion depth max.: 14.5 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Insertion depth min.: 10 mm
Insertion depth max.: 14.5 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Insertion depth min.: 10 mm
Insertion depth max.: 14.5 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Insertion depth min.: 10 mm
Insertion depth max.: 14.5 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Insertion depth min.: 10 mm
Insertion depth max.: 14.5 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
LED signaling
Demonstration of the LED status signaling
Your desired STEP file is not listed:
Request STEP file here
Description | |
---|---|
CB5 | axial, 5-pin, shield connected to encoder housing |
Description | |
---|---|
L1 | radial, shield connected to encoder housing (IP40) |
(+) Vcc | BN |
GND | WH |
CANHigh | GN |
CANLow | YE |
CANGND shield | shield |
Your desired STEP file is not listed:
Request STEP file here
Description | |
---|---|
L2 | axial, shield connected to encoder housing |
(+) Vcc | BN |
GND | WH |
CANHigh | GN |
CANLow | YE |
CANGND shield | shield |

Shaft adapter WDGWA10M06
for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M6.

Shaft adapter WDGWA10M08
for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M8.

Shaft adapter WDGWA10M10
for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M10.

Shaft adapter WDGWA10M12
for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M12.

Shaft adapter WDGWA10M14
for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M14.

Shaft adapter WDGWA10M16
for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M16.

Shaft adapter WDGWA10M20
for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M20.
The encoder WDGA 36E CAN SAE J1939 is also available with fixed 120 Ohm terminating resistor.
Here you find a list of our distributors worldwide