deenfresitcntr
Encoders incremental quadrature
Shaft encoders incremental quadrature (housing dimension)
Hollow shaft encoders incremental quadrature (housing dimension)
Information
WDGI 50V

Shaft Encoder incremental,
resolution: up to 16384 ppr,
Screw flange: Ø 50 mm [1.969"]

Shaft Ø: 6 mm [0.236"],
IP67 all around,
Signal shape: square-wave,
Operating principle: magnetic

Data sheet
Drehgeber Encoder WDGI50V
Illustration similar
Highlights
  • Extremely rugged and economical encoder with short measurements
  • Easy screw mounting
  • Protection to IP67 all around
  • Optional: -40 °C up to +85 °C [-40 °F up to +185 °F]
Product details
Flange
screw flange
Pulses per revolution PPR
1 PPR up to 16384 PPR
Housing
Ø 50 mm [Ø 1.969"]
stainless steel, V2A
Shaft
Ø 6 mm [Ø 0.236"]
Shaft length: L: 13 mm [0.512"]
Max. Permissible shaft loading radial: 30 N [3.059 kp]
Max. Permissible shaft loading axial: 45 N [4.589 kp]
Max. operating speed
6000 rpm
Operating principle
magnetic
Output circuit
HTL (TTL at 5 VDC)
HTL, inv. (TTL/RS422 comp. at 5 VDC)
Output frequency
HTL up to 16384 ppr, max. 600 kHz
TTL up to 16384 ppr, max. 1 MHz
Power supply
4.75 VDC up to 30 VDC
Current consumption: typ. 40 mA

Environmental data

ESD (DIN EN 61000-4-2):

8 kV

Burst (DIN EN 61000-4-4):

2 kV

includes EMC:

DIN EN 61000-6-2
DIN EN 61000-6-3

Vibration:
(DIN EN 60068-2-6)

50 m/s2 (10 Hz up to 2000 Hz)

Shock:
(DIN EN 60068-2-27)

1000 m/s2 (6 ms)

Electrial Safety:

according DIN VDE 0160

Duty information

Customs tariff number:

90318020

Country of origin:

Germany

Operating temperature
Connector: -40 °C up to +85 °C, Cable: -20 °C up to +80 °C (Option ACA: -40 °C up to +85 °C). Connector: -40 °F up to +185 °F, Cable: -4 °F up to +176 °F, Option ACA: -40 °F up to +185 F°
Protection class
IP67 all around

Your desired STEP file is not listed:
Request STEP file here

DescriptionABN inv. poss.
L2axial, shield connected to encoder housing●
Assignments
 L2L2
CircuitN35M35
GNDWHWH
(+) VccBNBN
AGNGN
BYEYE
NGYGY
---
A inv.-RD
B inv.-BK, (BU at ACA)
N inv.-VT
Shieldflexflex

Your desired STEP file is not listed:
Request STEP file here

DescriptionABN inv. poss.
SB5axial, 5-pin, Connector connected to encoder housing-
SB8axial, 8-pin, Connector connected to encoder housing●
Assignments
SB5SB8
 5-pin8-pin
connector drawing
CircuitN35M35
GND31
(+) Vcc12
A43
B24
N55
---
A inv.-6
B inv.-7
N inv.-8
n. c.--
Shield--
1-16384 PPR
Power supply VDC
4.75 - 30 VDC
Current consumption
typ. 40 mA
Signal shape
square-wave
Output circuit
HTL (TTL at 5 VDC)
Channels
AB, ABN
Output
push-pull
Load
max. 40 mA / channel
Signal level mA
at 20 mA
Signal level H>
H > Vcc -10% Vcc
Signal level L<
L < 2.5 VDC
Output frequency
HTL: max. 600 kHZ; TTL: max. 1 MHz
Circuit protection
inverse-polarity and short-circuit protection
Light reserve warning
no
Power supply VDC
4.75 - 30 VDC
Current consumption
typ. 40 mA
Signal shape
square-wave
Output circuit
HTL, inv. (TTL/RS422 comp. at 5 VDC)
Channels
AB, ABN, and inverted signals
Output
push-pull
Load
max. 40 mA / channel
Signal level mA
at 20 mA
Signal level H>
H > Vcc -10% Vcc
Signal level L<
L < 2.5 VDC
Output frequency
HTL: max. 600 kHZ; TTL: max. 1 MHz
Circuit protection
inverse-polarity and short-circuit protection
Light reserve warning
no
The encoder WDGI 50V with the output circuit types N35, M35 is also available with the extended temperature range -40 °C up to +85 °C [-40 °F up to +185 °F] (measured at the flange).
The encoder WDGI 50V can be supplied with more than 2 m cable. The maximum cable length depends on the supply voltage and the frequency; see 'General Technical Data'
Please extend the standard order code with a three figure number, specifying the cable length in decimetres.
Example: 5 m cable = 050
General technical Data and safety instructions incremental encoders
General technical Data and safety instructions incremental encoders WDG/WDGI

Download (891 KB)
Kurzkatalog Drehgeber - Short catalogue encoders
Short-Catalogue Encoders and systems

  • Incremental and absolute encoders
  • Digital shaft copying
  • Made in Germany
  • Motorfeedback
  • Position Measurement Systems

Download (4.29 MB)
Delivery times and service
Delivery times and service

of Wachendorff Automation GmbH & Co. KG

Download (543 KB)
Assembly instructions shaft encoders
Assembly instructions shaft encoders WDG/WDGI

Download (1.62 MB)
Whitepaper optisch und magnetisch Inkremental
Whitepaper


Comparison of optical and magnetic incremental encoders

Download (1.68 MB)
CE Konformitätserklärungen WDG / WDGI
EC declaration of conformity incremental encoder WDG / WDGI

for Wachendorff Automation GmbH & Co. KG.

Download (591 KB)
UKCA-Declaration of conformity WDG/WDGI
UKCA declaration of conformity incremental encoder WDG / WDGI

for Wachendorff Automation GmbH & Co. KG.

Download (146 KB)
UL Certificates for Wachendorff Automation Products 2014-03-28
UL Certificates

for Wachendorff Automation products.

Download (556 KB)
REACH regulation
REACH- and RoHS regulation of the EU

Information

Download (179 KB)
ISO Zertifikat DIN EN 9001:2015
ISO Certificate DIN EN 9001:2015

Download (405 KB)
Counter for incremental encoders, 1 MHz WDG553XDOM
WDG553XDOM

Counter for incremental encoders, 1 MHz

High Speed position counters and differential counters
for incremental encoder signals.

Details
WDG012VGOM Verteiler Splitter
WDG012VGOM

Cross switcher and splitter

for incremental encoder signals

Details
KI467 Drehgeber Kabeldose
KI-4-67

Female connector KI-4-67:
Suitable for encoder with sensor connector outlet SB4 and SC4, 4 pin, IP67

Ready-made shielded connection cable with female cable connector straight,
shield connected.

Details
KIA467 Drehgeber Kabeldose
KIA-4-67

Female connector KIA-4-67:
Suitable for encoder with sensor connector outlet SB4 and SC4, 4 pin, IP67

Ready-made shielded connection cable with female cable connector angular,
shield connected.

Details
KI567 Drehgeber Kabeldose
KI-5-67

Female connector KI-5-67:
Suitable for encoder with sensor connector outlet SB5 and SC5, 5 pin, IP67

Ready-made shielded connection cable with female cable connector straight,
shield connected.

Details
KIA567 Drehgeber Kabeldose
KIA-5-67

Female connector KIA-5-67:
Suitable for encoder with sensor connector outlet SB5 and SC5, 5 pin, IP67

Ready-made shielded connection cable with female cable connector angular,
shield connected.

Details
KI867 Drehgeber Kabeldose
KI-8-67

Female connector KI-8-67:
Suitable for encoder with sensor connector outlet SB8 and SC8, 8 pin, IP67

Ready-made shielded connection cable with female cable connector straight,
shield connected.

Details
KIA867 Drehgeber Kabeldose
KIA-8-67

Female connector KIA-8-67:
Suitable for encoder with sensor connector outlet SB8 and SC8, 8 pin, IP67

Ready-made shielded connection cable with female cable connector angular,
shield connected.

Details
MW40S Drehgeber Montagewinkel
MW40S

Mounting angle MW40S

suitable for incremental encoder 36S, 40S, 50V, 53V.

external linkSTEP-download MW40S

Details
QF40S Drehgeber Quadratflansch 01
QF40S

Square flange QF40S
 

suitable for incremental encoder 36S, 40S, 50V, 53V

Details
distributors
For further information please contact our local distributor.
Here you find a list of our distributors worldwide
You want to get an offer or want a recall. Request
to top
Contact
Contact
Request form