Absolute hollow bore (blind) encoder, magnetic, SSI WDGA 36E
Housing: Ø 36 mm
16/43-bit Single-turn/Multi-turn;
hollow bore (blind): Ø 6 mm, Ø 1/4"
binary or gray code
- EnDra multiturn technology: maintenance-free and environmentally friendly
- Compact industrial model
- Interface: SSI (Synchronous-serial Interface)
- Code: Binary- or Gray
- Preset input
- Direction of counting changeable
- Status indicator LED
- EMC: EN 61000-6-2, EN 61000-6-3
up to 65,536 steps/360° (16 bit)
Multi-turn Resolutionup to 43 bit.
Insertion depth min.: 8 mm
Insertion depth max.: 17 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Insertion depth min.: 8 mm
Insertion depth max.: 17 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
Current consumption: typ. 80 mA
Power consumption: max. 0.44 W
| Description | |
|---|---|
| L2 | axial, shield connected to encoder housing |
| GND | WH |
| (+) Vcc | BN |
| SSI CLK+ | GN |
| SSI CLK- | YE |
| SSI DATA+ | GY |
| SSI DATA- | PK |
| PRESET | BU |
| DIR | RD |
| Shield | housing |
| Description | |
|---|---|
| K1 | radial, shield not connected |
| GND | WH |
| (+) Vcc | BN |
| SSI CLK+ | GN |
| SSI CLK- | YE |
| SSI DATA+ | GY |
| SSI DATA- | PK |
| PRESET | BU |
| DIR | RD |
| Shield | housing n. c. |
| Description | |
|---|---|
| K6 | axial, shield not connected |
| GND | WH |
| (+) Vcc | BN |
| SSI CLK+ | GN |
| SSI CLK- | YE |
| SSI DATA+ | GY |
| SSI DATA- | PK |
| PRESET | BU |
| DIR | RD |
| Shield | housing n. c. |
| Description | |
|---|---|
| CB8 | axial, 8-pin, shield connected to encoder housing |
SSI display unit for absolute encoders WDGA SSI with
Singleturn or Multiturn
with 4 presets and outputs
Female connector KI-8-67-SSI:
Suitable for encoder absolute WDGA SSI
with connector outlet CB8 and CC8, 8 pin, IP67
Ready-made shielded connection cable
with female cable connector straight, shield connected.
Female connector KIA-8-67-SSI:
Suitable for encoder absolute WDGA SSI
with sensor connector outlet CB8 and CC8, 8 pin, IP67.
Ready-made shielded connection cable
with female cable connector angular, shield connected.
Torque support WDGDS10016
for hollow shaft encoder WDGA 36E with hollow shaft (blind) Ø 6 mm.
Here you find a list of our distributors worldwide
print page
up
Contact
Request form
