Absolute shaft encoder RS485 WDGA 58V,
Especially for food and beverage industry
Acid- and alkaline resistance
High pressure / steam cleaning
Clamping flange;
Housing: Ø 58 mm [2.283"]
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm [0.394"];
CRC checksum
- Resistance to salt mist acc. to (IEC 60068-2-11)
- High protection rating IP67 all around and IP69K
(high pressure / steam cleaning) - EHEDG: Tested hygienic design
- Ecolab: Certificate on resistance to cleaning and disinfection agents
- Acid- and alkaline resistance
- Radial shaft sealing ring with no dead-room (PTFE)
- EnDra® technology:
maintenance-free and environmentally friendly - RS485
- Single-turn/Multi-turn (max. 16 bit /32 bit)
- Forward-looking technology with 32 Bit processor
up to 65,536 steps/360° (16 bit)
Multi-turn Resolutionup to 32 bit.
Shaft length: L: 18 mm [0.709"]
Max. Permissible shaft loading radial: 100 N [10.197 kp]
Max. Permissible shaft loading axial: 100 N [10.197 kp]
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
Current consumption: typ. 80 mA
Power consumption: max. 0.44 W
| Description | |
|---|---|
| L3 | radial, shield connected to encoder housing |
| S- (GND) | OG |
| S+ (DCin) | BN |
| A (DATA+) | GY |
| B (DATA-) | PK |
| PRESET | BU |
| DIR | RD |
| Shield | housing |
- Absolute encoders with flange Ø 36 mm / Ø 58 mm
- Single-/Multiturn (16/43)
- Ground-breaking technology 32 Bit processor
- Very high shaft loading, IP67
- EnDra® Multiturn technology: No gears, no battery
- QuattroMag® Singleturn technology: High precision +/- 0,0878°
Download (1.33 MB)
- Incremental and absolute encoders
- Digital shaft copying
- Made in Germany
- Motorfeedback
- Position Measurement Systems
Download (4.30 MB)
against the detergent and desinfectants P3-topactive DES, P3-topax 19, P3-topax 56, P3-topax 66 and P3-topax 91, as well as demineralised water as zero value.
Download (110 KB)
for Wachendorff Automation GmbH & Co. KG.
Download (611 KB)
for Wachendorff Automation GmbH & Co. KG.
Download (144 KB)
Double loop coupling DSKF29
with FDA-compliant plastic and hubs made of V4A (1.4404) stainless steel
for encoder with shaft Ø 6 mm, 8 mm or 10 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.
Double loop coupling DSKF48
with FDA-compliant plastic and hubs made of V4A (1.4404) stainless steel
for encoder with shaft Ø 10 mm, 12 mm or 14 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.
Here you find a list of our distributors worldwide
to top
Contact
Request form