WDGA 36E CAN SAE J1939
Absolute encoder, magnetic, CAN SAE J1939 WDGA 36E
hollow bore (blind)
Housing: Ø 36 mm
16/32-bit Single-turn/Multi-turn;
Hollow bore (blind): Ø 6 mm, Ø 1/4"
Highlights
- EnDra® Multiturn Technology: maintenance-free and environmentally friendly
- CAN SAE J1939 protocol
- Forward-looking technology with 32 Bit processor
- 2-colour-LED as indicator for operating condition
Product details
Flange
hollow shaft (blind-bored)
Housing
Ø 36 mm
stainless steel
Resolution
Single-turn Resolution
65.536 steps/360° (16 bit)
Multi-turn Resolutionup to 32 bit
Shaft
Ø 6 mm
Insertion depth min.: 8 mm
Insertion depth max.: 17 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Insertion depth min.: 8 mm
Insertion depth max.: 17 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Ø 6.35 mm, Ø 1/4"
Insertion depth min.: 8 mm
Insertion depth max.: 17 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Insertion depth min.: 8 mm
Insertion depth max.: 17 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Max. operating speed
12000 rpm
Power supply
4,75 VDC up to 32 VDC
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
Operating temperature
-40 °C up to +85 °C
Storage temperature
-40 °C up to +100 °C
Protection class
Housing: IP65, IP67; shaft sealed: IP65; cable outlet L1: IP40
Advice
LED signaling
Demonstration of the LED status signaling
Description | |
---|---|
CB5 | axial, 5-pin, shield connected to encoder housing |
Description | |
---|---|
CC5 | radial, 5-pin, shield connected to encoder housing |
Description | |
---|---|
L1 | radial, shield connected to encoder housing (IP40) |
Assignments
(+) Vcc | BN |
GND | WH |
CANHigh | GN |
CANLow | YE |
CANGND shield | shield |
Description | |
---|---|
L2 | axial, shield connected to encoder housing |
Assignments
(+) Vcc | BN |
GND | WH |
CANHigh | GN |
CANLow | YE |
CANGND shield | shield |
Description | |
---|---|
L3 | radial, shield connected to encoder housing |
Assignments
(+) Vcc | BN |
GND | WH |
CANHigh | GN |
CANLow | YE |
CANGND shield | shield |
Motor feedback installation solutions with EnDra® Technology
...to be directly installed in motors.
Download (1.38 MB)
Handout Absolute encoders WDGA
- Absolute encoders with flange Ø 36 mm / Ø 58 mm
- Single-/Multiturn (16/43)
- Ground-breaking technology 32 Bit processor
- Very high shaft loading, IP67
- EnDra® Multiturn technology: No gears, no battery
- QuattroMag® Singleturn technology: High precision +/- 0,0878°
Download (1.32 MB)
Short-Catalogue Encoders and systems
- Incremental and absolute encoders
- Digital shaft copying
- Made in Germany
- Motorfeedback
- Position Measurement Systems
Download (4.26 MB)
The HALT-Test
Download (528 KB)
Delivery times and service
of Wachendorff Automation GmbH & Co. KG
Download (543 KB)
Assembly instructions for WDGA absolute encoder SAE J1939
Download (836 KB)
EU declaration of conformity absolute encoder WDGA 2.0 CAN/SSI
for Wachendorff Automation GmbH & Co. KG.
Download (611 KB)
UKCA declaration of conformity absolute encoder WDGA 2.0 CAN/SSI
for Wachendorff Automation GmbH & Co. KG.
Download (144 KB)
UL Certificates
for Wachendorff Automation products.
Download (556 KB)
REACH- and RoHS regulation of the EU
Information
Download (128 KB)
ISO Certificate DIN EN 9001:2015
Download (405 KB)
The encoder WDGA 36E CAN SAE J1939 is also available with fixed 120 Ohm terminating resistor.
For further information please contact our local distributor.
Here you find a list of our distributors worldwide
Here you find a list of our distributors worldwide
You want to get an offer or want a recall. Request