WDGA 36E CAN SAE J1939
Absolute encoder WDGA 36E CAN SAE J1939;
hollow bore (blind)
Housing: Ø 36 mm [1.417"]
16/32-bit Single-turn/Multi-turn;
Hollow bore (blind) Ø: 6 mm [0.236"], 6.35 mm [1/4"]
Illustration similar
Highlights
- EnDra® Multiturn Technology: maintenance-free and environmentally friendly
- CAN SAE J1939 protocol
- Forward-looking technology with 32 Bit processor
- 2-colour-LED as indicator for operating condition
Product details
Flange
hollow shaft (blind-bored)
Housing
Ø 36 mm [Ø 1.417"]
stainless steel
Resolution
Single-turn Resolution
65.536 steps/360° (16 bit)
Multi-turn Resolutionup to 32 bit
Shaft
Ø 6 mm [Ø 0.236"]
Insertion depth min.: 8 mm [0.315"]
Insertion depth max.: 17 mm [0.669"]
Max. Permissible shaft loading radial: 80 N [8.157 kp]
Max. Permissible shaft loading axial: 50 N [5.098 kp]
Insertion depth min.: 8 mm [0.315"]
Insertion depth max.: 17 mm [0.669"]
Max. Permissible shaft loading radial: 80 N [8.157 kp]
Max. Permissible shaft loading axial: 50 N [5.098 kp]
Ø 6.35 mm [Ø 1/4"] Order No: 2Z
Insertion depth min.: 8 mm [0.315"]
Insertion depth max.: 17 mm [0.669"]
Max. Permissible shaft loading radial: 80 N [8.157 kp]
Max. Permissible shaft loading axial: 50 N [5.098 kp]
Insertion depth min.: 8 mm [0.315"]
Insertion depth max.: 17 mm [0.669"]
Max. Permissible shaft loading radial: 80 N [8.157 kp]
Max. Permissible shaft loading axial: 50 N [5.098 kp]
Max. operating speed
12000 rpm
Power supply
4,75 VDC up to 32 VDC
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
Operating principle
magnetic
Operating temperature
-40 °C up to +85 °C [-40 °F up to 185 °F]
Storage temperature
-40 °C up to +100 °C [-40 °F up to 212 °F]
Protection class
Housing: IP65, IP67; shaft sealed: IP65; cable outlet L1: IP40
Advice
LED signaling
Demonstration of the LED status signaling
| Description | |
|---|---|
| CB5 | axial, 5-pin, shield connected to encoder housing |
| Description | |
|---|---|
| CC5 | radial, 5-pin, shield connected to encoder housing |
| Description | |
|---|---|
| L1 | radial, shield connected to encoder housing (IP40) |
Assignments
| (+) Vcc | BN |
| GND | WH |
| CANHigh | GN |
| CANLow | YE |
| CANGND shield | shield |
| Description | |
|---|---|
| L2 | axial, shield connected to encoder housing |
Assignments
| (+) Vcc | BN |
| GND | WH |
| CANHigh | GN |
| CANLow | YE |
| CANGND shield | shield |
| Description | |
|---|---|
| L3 | radial, shield connected to encoder housing |
Assignments
| (+) Vcc | BN |
| GND | WH |
| CANHigh | GN |
| CANLow | YE |
| CANGND shield | shield |
Motor feedback installation solutions with EnDra® Technology
...to be directly installed in motors.
Download (1.39 MB)
Handout Absolute encoders WDGA
- Absolute encoders with flange Ø 36 mm / Ø 58 mm
- Single-/Multiturn (16/43)
- Ground-breaking technology 32 Bit processor
- Very high shaft loading, IP67
- EnDra® Multiturn technology: No gears, no battery
- QuattroMag® Singleturn technology: High precision +/- 0,0878°
Download (1.33 MB)
Short-Catalogue Encoders and systems
- Incremental and absolute encoders
- Digital shaft copying
- Made in Germany
- Motorfeedback
- Position Measurement Systems
Download (4.29 MB)
WDGDS10016
Torque support WDGDS10016
for hollow shaft encoder 36E with hollow shaft (blind) Ø 6 mm.
The encoder WDGA 36E CAN SAE J1939 is also available as a particularly smooth-
running low-friction encoder. The starting torque is thereby changed to ≤ 0.25 Ncm [0.354 in-ozf] and the protection class at the shaft input to IP50.
The encoder WDGA 36E CAN SAE J1939 is also available with fixed 120 Ohm terminating resistor.
For further information please contact our local distributor.
Here you find a list of our distributors worldwide
Here you find a list of our distributors worldwide
You want to get an offer or want a recall. Request
to top
Contact
Request form
