|
|
 |
|
|
WDGA-36A-CAN-SAE-J1939
Absolute shaft encoder, magnetic, CAN SAE J1939 WDGA 36A
Synchro flange;
Housing: Ø 36 mm
14/18-bit Single-/Multiturn;
Shaft: Ø 6 mm
Data sheet (PDF 166 KB)
|
|
| Highlights |
- Single-/Multiturn
- Max. 16,384 steps per revolution (14 bit)
- Max. 262,144 revolutions (18 bit), with high precision value up to 32 bit
- EnDra® Multiturn Technology: maintenance-free and environmentally friendly
- CAN SAE J1939 protocol
- Forward-looking technology with 32 Bit processor
- 2-colour-LED as indicator for operating condition
|
| Product details |
|
| Housing |
steel case chrome-plated,
magnetic shielding |
| Resolution |
14 bit (18 bit multiturn) |
| Baud rate |
max. 1 MBaud with automatic bit rate detection |
| Shaft |
Ø 6 mm |
| Max. operating speed |
12,000 rpm |
| Permitted load on shaft end |
50 N Fa
80 N Fr |
| Power supply |
10 VDC up to 30 VDC |
| Operating temperature |
-40 °C up to + 80 °C |
| Storage temperature |
-40 °C up to + 100 °C |
| Protection rating |
IP67, shaft sealed to IP65 |
| LED signaling |
Demonstration of the LED status signaling |
|
|
WDGA-36A-CAN-SAE-J1939
Clamping claw SP-3-00
suitable for incremental encoder WDG 58A, 58B, 58C, 58D, 58K, 63B and
absolute encoder WDGA 36A, WDGA 58A, WDGA 58B.
|
DETAILS
|
|
|
WDGA-36A-CAN-SAE-J1939
Jointed coupling ST27
for encoder with shaft Ø 6 mm or 10 mm
|
DETAILS
|
|
|
WDGA-36A-CAN-SAE-J1939
Slit coupling PK20
for encoder with shaft Ø 6 mm.
|
DETAILS
|
|
|
WDGA-36A-CAN-SAE-J1939
Slit coupling PK24
for encoder with shaft Ø 6 mm, 8 mm or 10 mm.
|
DETAILS
|
|
|
WDGA-36A-CAN-SAE-J1939
Spring disc coupling FSK22
for encoder with shaft Ø 6 mm, 10 mm or 12 mm.
|
DETAILS
|
|
|
WDGA-36A-CAN-SAE-J1939
Helical coupling WK22
for encoder with shaft Ø 6 mm.
|
DETAILS
|
|
|
WDGA-36A-CAN-SAE-J1939
Helical coupling WK24
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm.
|
DETAILS
|
|
|
WDGA-36A-CAN-SAE-J1939
Helical coupling WK32
for encoder with shaft Ø 6 mm or 10 mm.
|
DETAILS
|
|
|
WDGA-36A-CAN-SAE-J1939
Bellows coupling BK29
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm*.
Max. offset of shafts radial: ± 0,25 mm or ± 0,30 mm*
Torsion spring stiffness: 150 Nm/rad or 130 Nm/rad*
|
DETAILS
|
|
|
WDGA-36A-CAN-SAE-J1939
Bellows coupling FB29B
for encoder with shaft Ø 4 mm, 6 mm, 8 mm, 10 mm or 12 mm.
|
DETAILS
|
|
|
WDGA-36A-CAN-SAE-J1939
Double loop coupling DSK29
for encoder with shaft Ø 6 mm, 8 mm or 10 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.
|
DETAILS
|
|
|
WDGA-36A-CAN-SAE-J1939
Double loop coupling DSK38
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.
|
DETAILS
|
|
|
WDGA-36A-CAN-SAE-J1939
Paguflex coupling PF26 type 10
for encoder with shaft Ø 6 mm or 8 mm.
|
DETAILS
|
|
|
For further information please contact our local distributor.
Here you find a list of our
distributors worldwide
|
|
|
|
