Drehgeber WDGI63B
WDGI 63B

Shaft Encoder incremental quadrature, optical, WDGI 63B,
Clamping flange: Ø 2.5" (63 mm)
Dimensions inches and mm

Shaft: Ø 3/8" (9.525 mm), 10 mm,
Ø 7 mm / Ø 8 mm on request,
protection rating: up to IP67 all around,
resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.

    Product data

    Highlights
    • Housing cap die cast aluminum,
      with particularly eco-friendly powder coating
    • Up to 25000 PPR by use of high grad electronics
    • Protection to IP67, shaft sealed to IP65
    • Full connection protection with 10 VDC up to 30 VDC
    • High output frequency 600 kHz/2 MHz
    • Optional:
      -40 °C up to +85 °C [-40 °F à +185 °F],
      Protection to IP67 all around,
      Pressure equalising membrane
    Product details
    Flange
    clamping flange
    Max. pulses per revolution PPR
    up to 25000 PPR
    Housing
    Ø 63.5 mm [Ø 2.5 in]
    die cast aluminum, powder coated
    Shaft
    Ø 9.525 mm, Ø 3/8"
    Shaft length: L: 22.3 mm, L: 0.878 in
    Max. Permissible shaft loading radial: 220 N, 22.434 kp
    Max. Permissible shaft loading axial: 120 N, 12.237 kp
    Ø 10 mm
    Shaft length: L: 20 mm
    Max. Permissible shaft loading radial: 220 N
    Max. Permissible shaft loading axial: 120 N
    Advice: Ø 7 mm / Ø 8 mm on request
    Max. operating speed
    8000 rpm
    Output circuit
    TTL
    TTL, RS422 compatible, inv.
    HTL
    HTL, inv.
    1 Vpp sin/cos
    Output frequency
    TTL ≤ 5000 ppr, max. 200 kHz
    HTL ≤ 5000 ppr, max. 200 kHz
    TTL more than 1200 ppr, max. 2 MHz
    HTL more than 1200 ppr, max. 600 kHz
    1 Vpp sin/cos, max. 100 kHz
    Power supply
    4,75 VDC up to 5,5 VDC
    Current consumption: typ. 100 mA
    5 VDC up to 30 VDC
    Current consumption: typ. 70 mA
    10 VDC up to 30 VDC
    Current consumption: typ. 100 mA
    Operating temperature
    Connector: -20 °C up to +85 °C, cable: -20 °C up to +80 °C, (Option ACA: -40 °C up to +85 °C) [Connector: -4 °F up to +185 °F, cable: -4 °F up to +176 °F, (Option ACA: -40 °F up to +185 °F)]
    1 Vpp: -10 °C up to +70 °C [+14 °F up to +158 °F]
    Protection class
    IP67, shaft sealed to IP65

    Drawings and STEP-Data

    WDGI 63B: Cable connection K2, L2, axial, with 2 m cable

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    K2 axial, shield not connected
    L2 axial, shield connected to encoder housing
    Assignments
     K2, L2K2, L2K2, L2K2, L2L2
    CircuitG05, G24F05, H05, F24, H24, H30I05, I24, 524P05, R05, P24, R24, 245, 645, R30SIN
    GNDWHWHWHWHWH
    (+) VccBNBNBNBNBN
    AGNGNGNGNGN
    BYEYEYEYEGY
    NGYGYGYGY-
    Light reserve warningPK-PK--
    A inv.--RDRDYE
    B inv.--BK, (BU at ACA)BK, (BU at ACA)PK
    N inv.--VTVT-
    Shieldflexflexflexflexflex

    WDGI 63B: Cable connection K3, L3, radial, with 2 m cable

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    K3 radial, shield not connected
    L3 radial, shield connected to encoder housing
    Assignments
     K3, L3K3, L3K3, L3K3, L3L3
    CircuitG05, G24F05, H05, F24, H24, H30I05, I24, 524P05, R05, P24, R24, 245, 645, R30SIN
    GNDWHWHWHWHWH
    (+) VccBNBNBNBNBN
    AGNGNGNGNGN
    BYEYEYEYEGY
    NGYGYGYGY-
    Light reserve warningPK-PK--
    A inv.--RDRDYE
    B inv.--BK, (BU at ACA)BK, (BU at ACA)PK
    N inv.--VTVT-
    Shieldflexflexflexflexflex

    WDGI 63B: Connector (M16x0.75) SI, axial, 5-, 6-, 8-, 12-pin

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    SI5 axial, 5-pin, Connector connected to encoder housing-
    SI6 axial, 6-pin, Connector connected to encoder housing-
    SI8 axial, 8-pin, Connector connected to encoder housing
    SI12 axial, 12-pin, Connector connected to encoder housing
    Assignments
    SI5SI6SI6SI8SI8SI8SI12SI12SI12SI12SI12
     5-pin6-pin6-pin8-pin8-pin8-pin12-pin12-pin12-pin12-pin12-pin
    connector drawing
    CircuitF05, H05, F24, H24, H30G05, G24F05, H05, F24, H24, H30F05, H05, F24, H24, H30P05, R05, P24, R24, R30, 245, 645SING05, G24F05, H05, F24, H24, H30I05, I24, 524P05, R05, P24, R24, 245, 645, R30SIN
    GND166111K, LK, LK, LK, LK, L
    (+) Vcc211222M, BM, BM, BM, BM, B
    A322333EEEEE
    B444444HHHHH
    N53355-CCCC-
    Light reserve warning-5----G-G--
    A inv.----66--FFF
    B inv.----77--AAA
    N inv.----8---DD-
    n. c.--56, 7, 8-5, 8A, D, F, JA, D, F, G, JJG, JD, G, J
    Shield-----------

    WDGI 63B: Connector (M16x0.75) SH, radial, 5-, 6-, 8-, 12-pin

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    SH5 radial, 5-pin, Connector connected to encoder housing-
    SH6 radial, 6-pin, Connector connected to encoder housing-
    SH8 radial, 8-pin, Connector connected to encoder housing
    SH12 radial, 12-pin, Connector connected to encoder housing
    Assignments
    SH5SH6SH6SH8SH8SH8SH12SH12SH12SH12SH12
     5-pin6-pin6-pin8-pin8-pin8-pin12-pin12-pin12-pin12-pin12-pin
    connector drawing
    CircuitF05, H05, F24, H24, H30G05, G24F05, H05, F24, H24, H30F05, H05, F24, H24, H30P05, R05, P24, R24, R30, 245, 645SING05, G24F05, H05, F24, H24, H30I05, I24, 524P05, R05, P24, R24, 245, 645, R30SIN
    GND166111K, LK, LK, LK, LK, L
    (+) Vcc211222M, BM, BM, BM, BM, B
    A322333EEEEE
    B444444HHHHH
    N53355-CCCC-
    Light reserve warning-5----G-G--
    A inv.----66--FFF
    B inv.----77--AAA
    N inv.----8---DD-
    n. c.--56, 7, 8-5, 8A, D, F, JA, D, F, G, JJG, JD, G, J
    Shield-----------

    WDGI 63B: Connector (M16x0.75) S2, axial, 7-pin

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    S2 axial, 7-pin, Connector connected to encoder housing-
    Assignments
    S2S2
     7-pin7-pin
    connector drawing
    CircuitG05, G24F05, H05, F24, H24, H30
    GND11
    (+) Vcc22
    A33
    B44
    N55
    Light reserve warning6-
    A inv.--
    B inv.--
    N inv.--
    n. c.76, 7
    Shield--

    WDGI 63B: Connector (M16x0.75) S3, radial, 7-pin

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    S3 radial, 7-pin, Connector connected to encoder housing-
    Assignments
    S3S3
     7-pin7-pin
    connector drawing
    CircuitG05, G24F05, H05, F24, H24, H30
    GND11
    (+) Vcc22
    A33
    B44
    N55
    Light reserve warning6-
    A inv.--
    B inv.--
    N inv.--
    n. c.76, 7
    Shield--

    WDGI 63B: Connector (M23) S4, axial, 12-pin

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    S4 axial, 12-pin, Connector connected to encoder housing
    Assignments
    S4S4S4S4S4
     12-pin12-pin12-pin12-pin12-pin
    connector drawing
    CircuitG05, G24F05, H05, F24, H24, H30I05, I24, 524P05, R05, P24, R24, 245, 645, R30SIN
    GND1010101010
    (+) Vcc1212121212
    A55555
    B88888
    N3333-
    Light reserve warning11-11--
    A inv.--666
    B inv.--111
    N inv.--44-
    n. c.1, 2, 4, 6, 7, 91, 2, 4, 6, 7, 9, 112, 7, 92, 7, 9, 112, 3, 4, 7, 9, 11
    Shield-----

    WDGI 63B: Connector (M23) S5, radial, 12-pin

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    S5 radial, 12-pin, Connector connected to encoder housing
    Assignments
    S5S5S5S5S5
     12-pin12-pin12-pin12-pin12-pin
    connector drawing
    CircuitG05, G24F05, H05, F24, H24, H30I05, I24, 524P05, R05, P24, R24, 245, 645, R30SIN
    GND1010101010
    (+) Vcc1212121212
    A55555
    B88888
    N3333-
    Light reserve warning11-11--
    A inv.--666
    B inv.--111
    N inv.--44-
    n. c.1, 2, 4, 6, 7, 91, 2, 4, 6, 7, 9, 112, 7, 92, 7, 9, 112, 3, 4, 7, 9, 11
    Shield-----

    WDGI 63B: Connector (M23) S4R, axial, 12-pin (clockwise)

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    S4R axial, 12-pin, Connector connected to encoder housing
    Assignments
    S4RS4RS4RS4RS4R
     12-pin12-pin12-pin12-pin12-pin
    connector drawing
    CircuitG05, G24F05, H05, F24, H24, H30I05, I24, 524P05, R05, P24, R24, 245, 645, R30SIN
    GND1010101010
    (+) Vcc1212121212
    A55555
    B88888
    N3333-
    Light reserve warning11-11--
    A inv.--666
    B inv.--111
    N inv.--44-
    n. c.1, 2, 4, 6, 7, 91, 2, 4, 6, 7, 9, 112, 7, 92, 7, 9, 112, 3, 4, 7, 9, 11
    Shield-----

    WDGI 63B: Connector (M23) S5R, radial, 12-pin (clockwise)

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    S5R radial, 12-pin, Connector connected to encoder housing
    Assignments
    S5RS5RS5RS5RS5R
     12-pin12-pin12-pin12-pin12-pin
    connector drawing
    CircuitG05, G24F05, H05, F24, H24, H30I05, I24, 524P05, R05, P24, R24, 245, 645, R30SIN
    GND1010101010
    (+) Vcc1212121212
    A55555
    B88888
    N3333-
    Light reserve warning11-11--
    A inv.--666
    B inv.--111
    N inv.--44-
    n. c.1, 2, 4, 6, 7, 91, 2, 4, 6, 7, 9, 112, 7, 92, 7, 9, 112, 3, 4, 7, 9, 11
    Shield-----

    WDGI 63B: Sensor-connector (M12x1) SB, axial, 4-, 5-, 8-, 12-pin

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    SB4 axial, 4-pin, Connector connected to encoder housing-
    SB5 axial, 5-pin, Connector connected to encoder housing-
    SB8 axial, 8-pin, Connector connected to encoder housing
    SB12 axial, 12-pin, Connector connected to encoder housing
    Assignments
    SB4SB5SB8SB8SB8SB12SB12SB12SB12
     4-pin5-pin8-pin8-pin8-pin12-pin12-pin12-pin12-pin
    connector drawing
    CircuitF05, H05, F24, H24, H30F05, H05, F24, H24, H30F05, H05, F24, H24, H30P05, R05, P24, R24, R30, 245, 645SING05, G24F05, H05, F24, H24, H30I05, I24, 524P05, R05, P24, R24, 245, 645, R30
    GND331113333
    (+) Vcc112221111
    A243334444
    B424456666
    N-555-8888
    Light reserve warning-----5-5-
    A inv.---64--99
    B inv.---76--77
    N inv.---8---1010
    n. c.--6, 7, 8-7, 82, 7, 9, 10, 11, 122, 5, 7, 9, 10, 11, 122, 11, 122, 5, 11, 12
    Shield---------

    WDGI 63B: Sensor-connector (M12x1) SC, radial, 4-, 5-, 8-, 12-pin

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    SC4 radial, 4-pin, Connector connected to encoder housing-
    SC5 radial, 5-pin, Connector connected to encoder housing-
    SC8 radial, 8-pin, Connector connected to encoder housing
    SC12 radial, 12-pin, Connector connected to encoder housing
    Assignments
    SC4SC5SC8SC8SC8SC12SC12SC12SC12
     4-pin5-pin8-pin8-pin8-pin12-pin12-pin12-pin12-pin
    connector drawing
    CircuitF05, H05, F24, H24, H30F05, H05, F24, H24, H30F05, H05, F24, H24, H30P05, R05, P24, R24, R30, 245, 645SING05, G24I05, I24, 524F05, H05, F24, H24, H30P05, R05, P24, R24, 245, 645, R30
    GND331113333
    (+) Vcc112221111
    A243334444
    B424456666
    N-555-8888
    Light reserve warning-----55--
    A inv.---64-9-9
    B inv.---76-7-7
    N inv.---8--10-10
    n. c.--6, 7, 8-7, 82, 7, 9, 10, 11, 122, 11, 122, 5, 7, 9, 10, 11, 122, 5, 11, 12
    Shield---------

    Output circuits

    up to 2500 PPR

    H30: 5 - 30 VDC, HTL, without light reserve warning

    Power supply VDC
    5 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL
    Channels
    AB, ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 10 % Vcc
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    inverse-polarity protection only
    Light reserve warning
    no

    R30: 5 - 30 VDC, HTL inverted, without light reserve warning

    Power supply VDC
    5 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 10 % Vcc
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    inverse-polarity protection only
    Light reserve warning
    no

    up to 5000 PPR

    G05: 4.75 - 5.5 VDC, TTL, with light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL
    Channels
    ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    no
    Light reserve warning
    yes

    H05: 4.75 - 5.5 VDC, TTL, without light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL
    Channels
    AB, ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    no
    Light reserve warning
    no

    I05: 4.75 - 5.5 VDC, TTL, RS422 comp., inverted, with light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL, RS422 comp., inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    no
    Light reserve warning
    yes

    R05: 4.75 - 5.5 VDC, TTL, RS422 comp., inverted, without light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL, RS422 comp., inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    no
    Light reserve warning
    no

    G24: 10 - 30 VDC, HTL, with light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL
    Channels
    AB, ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    yes
    Light reserve warning
    yes

    H24: 10 - 30 VDC, HTL, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL
    Channels
    AB, ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    yes
    Light reserve warning
    no

    I24: 10 - 30 VDC, HTL inverted, with light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    yes
    Light reserve warning
    yes

    R24: 10 - 30 VDC, HTL inverted, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    yes
    Light reserve warning
    no

    524: 10 - 30 VDC, TTL, RS422 comp., inverted, with light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL, RS422 comp., inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 1.2 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    inverse-polarity protection only
    Light reserve warning
    yes

    245: 10 - 30 VDC, TTL, RS422 comp., inverted, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL, RS422 comp., inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 1.2 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    inverse-polarity protection only
    Light reserve warning
    no

    (higher frequency) 1200 up to 25000 PPR

    F05: 4.75 - 5.5 VDC, TTL, without light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 100 mA
    Signal shape
    square-wave
    Output circuit
    TTL
    Channels
    AB, ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 2 MHz
    Circuit protection
    no
    Light reserve warning
    no

    P05: 4.75 - 5.5 VDC, TTL, RS422 comp., inverted, without light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 100 mA
    Signal shape
    square-wave
    Output circuit
    TTL, RS422 comp., inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 2 MHz
    Circuit protection
    no
    Light reserve warning
    no

    F24: 10 - 30 VDC, HTL, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 100 mA
    Signal shape
    square-wave
    Output circuit
    HTL
    Channels
    ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 600 kHz
    Circuit protection
    yes
    Light reserve warning
    no

    P24: 10 - 30 VDC, HTL inverted, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 100 mA
    Signal shape
    square-wave
    Output circuit
    HTL inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 600 kHz
    Circuit protection
    yes
    Light reserve warning
    no

    645: 10 - 30 VDC, TTL, RS422 comp., inverted, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 100 mA
    Signal shape
    square-wave
    Output circuit
    TTL, RS422 comp., inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 1.2 VDC
    Output frequency
    max. 2 MHz
    Circuit protection
    inverse-polarity protection only
    Light reserve warning
    no

    1024, 2048 PPR

    SIN: 4.75 - 5.5 VDC, 1 Vpp sin/cos, without light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 100 mA without load
    Signal shape
    sinus
    Output circuit
    1 Vpp sin/cos
    Channels
    AB
    Output
    Sinus, Cosinus
    Load
    @ 1 Vpp sin/cos: min. 120 Ohm
    Signal level
    1 Vpp +/- 25 %
    Output frequency
    max. 100 kHz
    Circuit protection
    no
    Cabel lenght max.
    max. 150 m at <260 pF/m
    Light reserve warning
    no

    Options

    AAO: IP67 Shafts sealed to IP67 (not for 1 Vpp Sin/Cos)

    The encoder WDGI 63B can be supplied in a full IP67 version.
    Max. RPM: 3500 rpm
    Permitted Shaft-Loading, axial:100 N [10.197 kp]
    Permitted Shaft-Loading, radial:110 N [11.217 kp]
    Max. PPR: 2500 ppr
    Starting-torque:approx. 4 Ncm at ambient temperature [approx. 5.6645 in-ozf at ambient temperature]

    ACA: Low temperature

    The encoder WDGI 63B with the output circuit types F24, G24, I24, P24, R24, F05, G05, H05, I05, P05, R05, 245, 524, 645 is also available with the extended temperature range -40 °C up to +85 °C [-40 °F up to +185 °F] (measured at the flange).

    ACR: Pressure equalising membrane

    The WDGI 63B shaft encoder is also optionally available with a pressure equalising membrane. This prevents water from penetrating into the encoder housing in the case of high air humidity.
    The IP67 protection level, temperature range and salt spray resistance are maintained. Resistant to chemicals and solvents in accordance with DIN EN ISO 2812-1.

    XXX = Decimeter: Cable length

    The encoder WDGI 63B can be supplied with more than 2 m cable. The maximum cable length depends on the supply voltage and the frequency; see 'General Technical Data'
    Please extend the standard order code with a three figure number, specifying the cable length in decimetres.
    Example: 5 m cable = 050

    Accessories

    For incremental encoders female connectors / cable with female connector

    KI467 Drehgeber Kabeldose
    KI-4-67

    Female connector KI-4-67:
    Suitable for encoder with sensor connector outlet SB4 and SC4, 4 pin, IP67

    Ready-made shielded connection cable with female cable connector straight,
    shield connected.

    KIA467 Drehgeber Kabeldose
    KIA-4-67

    Female connector KIA-4-67:
    Suitable for encoder with sensor connector outlet SB4 and SC4, 4 pin, IP67

    Ready-made shielded connection cable with female cable connector angular,
    shield connected.

    KI567 Drehgeber Kabeldose
    KI-5-67

    Female connector KI-5-67:
    Suitable for encoder with sensor connector outlet SB5 and SC5, 5 pin, IP67

    Ready-made shielded connection cable with female cable connector straight,
    shield connected.

    KIA567 Drehgeber Kabeldose
    KIA-5-67

    Female connector KIA-5-67:
    Suitable for encoder with sensor connector outlet SB5 and SC5, 5 pin, IP67

    Ready-made shielded connection cable with female cable connector angular,
    shield connected.

    KD540 Drehgeber Kabeldose
    KD-5-40

    Female connector KD-5-40:
    Suitable for encoder with connector outlet SI/SH, 5 pin, IP40

    Straight female connector or
    straight connector with ready made cable.
    With female thread M16 x 0.75.

    KD567 Kabeldose Drehgeber
    KD-5-67

    Female connector KD-5-67:
    Suitable for encoder with connector outlet SSI/SH, 5 pin, IP67

    Straight female connector or
    straight connector with ready made cable.
    With female thread M16 x 0.75.

    KDA667 Drehgeber Kabeldose
    KDA-6-67

    Female connector KDA-6-67:
    Suitable for encoder with connector outlet SI/SH, 6 pin, IP67

    Angular female connector or
    angular connector with ready made cable.

    KD740 Drehgeber Kabeldose
    KD-7-40

    Female connector KD-7-40:
    Suitable for encoder with connector outlet S2/S3,, 7 pin, IP40

    Straight female connector or
    straight connector with ready made cable.
    With female thread M16 x 0.75.

    KDA740 Drehgeber Kabeldose
    KDA-7-40

    Female connector KDA-7-40:
    Suitable for encoder with connector outlet S2/S3, 7 pin, IP40

    Angular female connector or
    angular connector with ready made cable.
    With female thread M16 x 0.75.

    KD767 Drehgeber Kabeldose
    KD-7-67

    Female connector KD-7-67:
    Suitable for encoder with connector outlet S2/S3, 7 pin, IP67

    Straight female connector or
    straight connector with ready made cable.
    With female thread M16 x 0.75.

    KDA767 Drehgeber Kabeldose
    KDA-7-67

    Female connector KDA-7-67:
    Suitable for encoder with connector outlet S2/S3, 7 pin, IP67

    Angular female connector or
    angular connector with ready made cable.
    With female thread M16 x 0.75.

    KI867 Drehgeber Kabeldose
    KI-8-67

    Female connector KI-8-67:
    Suitable for encoder with sensor connector outlet SB8 and SC8, 8 pin, IP67

    Ready-made shielded connection cable with female cable connector straight,
    shield connected.

    KIA867 Drehgeber Kabeldose
    KIA-8-67

    Female connector KIA-8-67:
    Suitable for encoder with sensor connector outlet SB8 and SC8, 8 pin, IP67

    Ready-made shielded connection cable with female cable connector angular,
    shield connected.

    KD840 Drehgeber Kabeldose
    KD-8-40

    Female connector KD-8-40:
    Suitable for encoder with connector outlet SI/SH, 8 pin, IP40

    Straight female connector or
    straight female connector with ready made cable.

    KD867 Drehgeber Kabeldose
    KD-8-67

    Female connector KD-8-67:
    Suitable for encoder with connector outlet SI/SH, 8 pin, IP67

    Straight female connector or
    straight female connector with ready made cable.

    Drehgeber KDA867
    KDA-8-67

    Female connector KDA-8-67:
    Suitable for encoder with connector outlet SI/SH, 8 pin, IP67

    Angular female connector or
    angular connector with ready made cable.
    With female thread M16 x 0.75.

    Drehgeber KDA867S
    KDA-8-67-S

    Female connector KDA-8-67-S:
    Suitable for encoder with connector outlet SI/SH, 8 pin, IP67

    Angular female connector, shieldable or
    angular connector with ready made cable, shield connected.

    KI1267 Drehgeber Kabeldose
    KI-12-67

    Female connector KI-12-67:
    Suitable for encoder with sensor connector outlet SB12 and SC12, 12 pin, IP67

    Ready-made shielded connection cable with female cable connector straight,
    shield connected.

    KIA1267 Drehgeber Kabeldose
    KIA-12-67

    Female connector KIA-12-67:
    Suitable for encoder with sensor connector outlet SB12 and SC12, 12 pin, IP67

    Ready-made shielded connection cable with female cable connector angular,
    shield connected.

    KDSH1267 Drehgeber Kabeldose
    KD-SH12-67

    Female connector KD-SH12-67:
    Suitable for encoder with connector outlet SI/SH, 12 pin, IP67

    Straight female connector or
    straight connector with ready made cable.

    KD1267 Drehgeber Kabeldose
    KD-12-67

    Female connector KD-12-67:
    Suitable for encoder with connector outlet S4/S5, S4R/S5R, 12 pin, IP67

    Straight female connector or
    straight connector with ready made cable.
    clockwise or anti-clockwise.

    Link STEP-file

    KDA1267 Drehgeber Kabeldose
    KDA-12-67

    Female connector KDA-12-67:
    Suitable for encoder with connector outlet S4/S5, S4R/S5R, 12 pin, IP67

    Angular female connector or
    angular connector with ready made cable.
    Clockwise or anti-clockwise.
    Insert any mountable.

    KD84015S DIZ Drehgeber Kabeldose
    KD-8-40-15-S-DIZ

    Female connector KD-8-40-15-S-DIZ:
    For frequency inverters: Emotron

    Suitable for encoder with connector outlet SI8 and SH8, 8 pin, IP40.
    Connector (Sub-D 15 pin, 2 rows).
    Ready-made shielded connection cable with female cable connector straight and Sub-D connector.
    Female connector/ housing / connector housing electrically connected.

    KD84015S RST Drehgeber Kabeldose
    KD-8-40-15-S-RST

    Female connector KD-8-40-15-S-RST:
    For frequency inverters: RST

    Suitable for encoder with connector outlet SI8 and SH8, 8 pin, IP40.
    Connector (Sub-D 15 pin, 2 rows).
    Ready-made shielded connection cable with female cable connector straight and Sub-D connector.
    Female connector/ housing / connector housing electrically connected.

    KD84015S SDR Drehgeber Kabeldose
    KD-8-40-15-S-SDR

    Female connector KD-8-40-15-S-SDR:
    For controller: Schindler MX

    Suitable for encoder with connector outlet SI8 and SH8, 8 pin, IP40.
    Connector (Sub-D 15 pin, 2 rows).
    Ready-made shielded connection cable with female cable connector straight and Sub-D connector
    Female connector/ housing / connector housing electrically connected.

    KD84015S CTF Drehgeber Kabeldose
    KD-8-40-15-S-CTF

    Female connector KD-8-40-15-S-CTF:
    For frequency inverters: Control Techniques

    Suitable for encoder with connector outlet SI8 and SH8, 8 pin, IP40.
    Connector (Sub-D 15 pin, 3 rows).
    Ready-made shielded connection cable with female cable connector straight and Sub-D connector
    Female connector/ housing / connector housing electrically connected.

    KD84015S KEB Drehgeber Kabeldose
    KD-8-40-15-S-KEB

    Female connector KD-8-40-15-S-KEB:
    For frequency inverters: KEB

    Suitable for encoder with connector outlet SI8 and SH8, 8 pin, IP40.
    connector (Sub-D 15 pin, 3 rows).
    Ready-made shielded connection cable with female cable connector straight and Sub-D connector
    Female connector/ housing / connector housing electrically connected.

    KD84015S LOH Drehgeber Kabeldose
    KD-8-40-15-S-LOH

    Female connector KD-8-40-15-S-LOH:
    For frequency inverters: Flender Loher, type Dynavert L

    Suitable for encoder with connector outlet SI8 and SH8, 8 pin, IP40.
    connector (Sub-D 15 pin, 3 rows).
    Ready-made shielded connection cable with female cable connector straight and Sub-D connector
    Female connector/ housing / connector housing electrically connected.

    KD84015S LIF Drehgeber Kabeldose
    KD-8-40-15-S-LIF

    Female connector KD-8-40-15-S-LIF:
    For frequency inverters: Liftequip

    Suitable for encoder with connector outlet SI8 and SH8, 8 pin, IP40.
    Connector (Sub-D 9 pin, 2 rows).
    Ready-made shielded connection cable with female cable connector straight and Sub-D connector.
    Female connector/ housing / connector housing electrically connected.

    KD84015S ZIL Drehgeber Kabeldose
    KD-8-40-15-S-ZIL

    Female connector KD-8-40-15-S-ZIL:
    For frequency inverters: Ziehl-Abegg

    Suitable for encoder with connector outlet SI8 and SH8, 8 pin, IP40.
    connector (Sub-D 9 pin, 2 rows).
    Ready-made shielded connection cable with female cable connector straight and Sub-D connector.
    Female connector/ housing / connector housing electrically connected.

    Mounting accessories

    SP300 Drehgeber Spannexzenter
    SP-3-00

    Clamping claw SP-3-00

    suitable for incremental encoder WDG 40A, 50B, 58T, WDGI 58A, 58B, 58C, 58D, 58K, 63B and absolute encoder WDGA 36A, WDGA 58A, WDGA 58B.

    You want to get an offer or want a recall.
    distributors
    For further information please contact our local distributor.
    Here you find a list of our distributors worldwide