Encoder configurator
For advice " from person to person "
Please contact your local distributor. Distributors worldwide
To configure your data sheet:
(1) When you click on "Details" 
of the rotary encoder type, our configurator stores your configured data.
(2) This means that you can continue configuring your selected rotary encoder type at product level (in the "Configurator" tab) 
Iand generate a data sheet corresponding to your configuration at any time.
Shaft Encoder, incremental quadrature, magnetic, WDG 24C,
Synchro flange: Ø 24 mm
Shaft: Ø 6 mm,
protection rating: up to IP67 all around,
resolution: up to 1024 ppr,
Signal shape: square-wave.
Shaft Encoder, incremental quadrature, magnetic, WDG 30A,
Synchro flange: Ø 30 mm
Shaft: Ø 6 mm,
protection rating: up to IP67 all around,
resolution: up to 1024 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, magnetic, WDGP 36A,
Servo flange: Ø 36 mm
Shaft: Ø 6 mm, Ø 8 mm,
resolution up to 16384 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, magnetic, WDGP 36K,
Round flange: Ø 36 mm
Shaft: Ø 6 mm,
resolution up to 16384 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, magnetic, WDGP 36S,
Screw flange: Ø 36 mm
Shaft: Ø 6 mm,
resolution up to 16384 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, optical, WDG 40A,
Servo flange: Ø 40 mm
Shaft: Ø 6 mm,
protection rating: up to IP67 all around,
resolution up to 2500 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, magnetic, WDG 40A,
Servo flange: Ø 40 mm
Shaft: Ø 6 mm,
protection rating: up to IP67 all around,
resolution up to 1024 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, optical, WDG 40K,
Round flange: Ø 40 mm
Shaft: Ø 6 mm,
Protection to IP67, shaft sealed to IP65
Resolution up to 2500 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, magnetic, WDG 40K,
Round flange: Ø 40 mm
Shaft: Ø 6 mm,
Protection to IP67, shaft sealed to IP65
Resolution up to 1024 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, optical, WDG 40S,
Screw flange: Ø 40 mm
Shaft: Ø 6 mm,
protection rating: up to IP67 all around,
resolution: up to 2500 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, magnetic, WDG 40S,
Screw flange: Ø 40 mm
Shaft: Ø 6 mm,
protection rating: up to IP67 all around,
resolution: up to 1024 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, optical, WDG 50B,
Clamping flange: Ø 50 mm
Shaft: Ø 8 mm,
Protection to IP67, shaft sealed to IP65,
resolution: up to 2500 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, magnetic, WDG 50B,
Clamping flange: Ø 50 mm
Shaft: Ø 8 mm,
Protection to IP67, shaft sealed to IP65,
resolution: up to 1024 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, optical, WDG 53V,
Screw flange: Ø 53 mm
(WDG 53V substitutes WDG 53S)
Shaft: Ø 6 mm,
protection rating: IP68 all around,
resolution: up to 1500 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, optical, WDGI 58A,
Synchro flange: Ø 58 mm
Shaft: Ø 6 mm,
Protection to IP67, shaft sealed to IP65
Resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Shaft Encoder incremental quadrature, magnetic, WDGI 58A,
Synchro flange: Ø 58 mm
Shaft: Ø 6 mm,
Protection to IP67, shaft sealed to IP65
Resolution: up to 1024 ppr,
Signal shape: square-wave
Shaft Encoder incremental quadrature, magnetic, WDGP 58A,
Servo flange: Ø 58 mm
Shaft: Ø 6 mm, Ø 10 mm,
resolution up to 16384 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, optical, WDGI 58B,
Clamping flange: Ø 58 mm
Shaft: Ø 10 mm,
Ø 7 mm / Ø 8 mm / Ø 12 mm on request,
Protection rating: up to IP67 all around,
Resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Shaft Encoder incremental quadrature, magnetic, WDGI 58B,
Clamping flange: Ø 58 mm
Shaft: Ø 10 mm,
Ø 7 mm / Ø 8 mm / Ø 12 mm on request,
Protection rating: up to IP67 all around,
Resolution: up to 1024 ppr,
Signal shape: square-wave
Shaft Encoder incremental quadrature, magnetic, WDGP 58B,
Clamping flange: Ø 58 mm
Shaft: Ø 6 mm, Ø 8 mm, Ø 3/8" (9.525 mm), Ø 10 mm,
resolution up to 16384 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, optical, WDGI 58C,
Synchro flange: Ø 58 mm
Shaft: Ø 10 mm,
Protection to IP67, shaft sealed to IP65,
Resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Shaft Encoder incremental quadrature, optical, WDGI 58D,
Clamping flange: Ø 58 mm
Shaft: Ø 12 mm,
Protection to IP67, shaft sealed to IP65,
High shaft load: radial 500 N, axial 500 N,
Resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Shaft Encoder incremental quadrature, magnetic, WDGI 58D,
Clamping flange: Ø 58 mm
Shaft: Ø 12 mm,
Protection to IP67, shaft sealed to IP65,
High shaft load: radial 500 N, axial 500 N,
Resolution: up to 1024 ppr,
Signal shape: square-wave
Shaft Encoder incremental quadrature, optical, WDGI 58K,
Clamping flange: Ø 58 mm
Shaft: Ø 6 mm,
Protection rating: up to IP67 all around,
Resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Shaft Encoder incremental quadrature, optical, WDGI 58N,
Clamping flange: Ø 58 mm
Shaft: Ø 6 mm, Ø 8 mm, Ø 3/8", Ø 10 mm,
Protection rating: up to IP67 all around,
Resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Encoder incremental quadrature, optical, WDG 58R:
conical shaft (with stator coupling); Ø 58 mm
Shaft: cone 1/10,
Protection rating: IP65, IP67, shaft sealed to IP65,
Resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Shaft Encoder incremental quadrature, optical, WDG 58S,
Clamping flange: Ø 58 mm
Salt mist IEC 60068-2-11
Corrosion resistance
Shaft: Ø 10 mm,
Protection rating: IP67 + IP69K, (high pressure / steam cleaning)
Resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Shaft Encoder incremental quadrature, optical, WDG 58T,
Clamping flange: Ø 58 mm
Available ex-stock
Shaft: Ø 10 mm,
Protection rating: IP40, shaft sealed to IP54,
Resolution: 360 ppr, 500 ppr, 1024 ppr,
Signal shape: square-wave.
Shaft Encoder incremental quadrature, optical, WDG 58V,
Clamping flange: Ø 58 mm
Especially for food and beverage industry
Acid- and alkaline resistance
Shaft: Ø 10 mm,
Protection rating: IP67 + IP69K,
Resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Shaft Encoder incremental quadrature, optical, WDGI 63B,
Clamping flange: Ø 2.5" (63 mm)
Dimensions inches and mm
Shaft: Ø 3/8" (9.525 mm), 10 mm,
Ø 7 mm / Ø 8 mm on request,
protection rating: up to IP67 all around,
resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Shaft Encoder incremental quadrature, optical, WDGI 63Q,
Square flange: Ø 2.5" (63 mm)
Dimensions inches and mm
Shaft: Ø 3/8" (9.525 mm), 10 mm,
Ø 7 mm / Ø 8 mm on request,
protection rating: up to IP67 all around,
resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Shaft Encoder incremental quadrature, optical, WDGI 67Q,
Square flange: 2.65" (67.3 mm)
Dimensions inches and mm
Shaft: Ø 3/8", (9.525 mm),
Ø 7 mm / Ø 8 mm on request,
protection rating: up to IP67 all around,
resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Shaft Encoder incremental quadrature, optical, WDGI 70B,
(replaced WDG 90B)
Clamping flange: Ø 70 mm
Shaft: Ø 12 mm,
protection rating: up to IP67 all around,
resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Shaft Encoder incremental quadrature, optical, WDGI 115M,
Tacho flange: Ø 115 mm
Shaft: Ø 11 mm,
protection rating: up to IP67 all around,
resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Shaft Encoder incremental quadrature, optical, WDGI 115T,
Tacho flange: Ø 115 mm
Shaft: Ø 10 mm,
Ø 7 mm / Ø 8 mm / Ø 12 mm on request,
protection rating: up to IP67 all around,
resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Hollow bore (blind) encoder, magnetic, WDGP 36E,
Housing: Ø 36 mm
Hollow bore blind: Ø 6 mm, Ø 1/4" (6.35 mm);
resolution up to 16384 ppr,
Signal shape: square-wave.
Hollow bore (blind) encoder, magnetic, WDGP 36E,
Housing: Ø 36 mm
Hollow bore blind: Ø 12 mm, Ø 14 mm, Ø 15 mm,
Ø 8, 10 mm with adapter sleeve;
resolution up to 16384 ppr,
Signal shape: square-wave.
Hollow Bore (blind) Encoder incremental quadrature, optical,
WDG 40E: Ø 40 mm
Bore size: Ø 6 mm,
Protection rating: IP67,
Shaft sealed to IP65,
Resolution: up to 2500 ppr,
Signal shape: square-wave.
Hollow Bore (blind) Encoder incremental quadrature, optical,
WDGI 58E: Ø 58 mm
Hollow Bore (blind) Encoder: bore size 15 mm
Bore size: Ø 8, 10, 12, 15 mm, H7,
Ø 6, 6.35 (1/4''), 7, 9.525 mm (3/8'') with adapter sleeve;
Protection rating: IP67, shaft sealed to IP65,
Resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Hollow Bore (blind) Encoder incremental quadrature, magnetic,
WDGI 58E: Ø 58 mm
Bore size Ø 12 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Protection rating: IP67, shaft sealed to IP65,
Resolution: up to 1024 ppr,
Signal shape: square-wave
Hollow bore (blind) encoder, magnetic, WDGP 58E,
Housing: Ø 58 mm
Hollow bore blind: Ø 12 mm, Ø 14, Ø 15 mm;
Ø 6, 8, 10 mm with adapter sleeve;
resolution up to 16384 ppr,
Signal shape: square-wave.
Thru-Bore Encoder incremental quadrature, optical,
WDGI 58H: Ø 58 mm
Bore size: Ø 8, 10, 12, 12.7 mm (1/2"), 14, 15 mm, H7,
Ø 6, 6.35 (1/4''), 7, 9.525 mm (3/8'') with adapter sleeve;
Protection rating: IP65,
Resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.
Thru-Bore Encoder incremental quadrature, optical,
WDG 80H: Ø 80 mm
Bore size: Ø 10, 12, 14, 15, 16, 18, 20, 25, 27 mm, H8,
Protection rating: IP65,
Resolution: up to 3840 ppr,
Signal shape: square-wave or sine/cosine.
Thru-Bore Encoder incremental quadrature, optical,
WDG 100H: Ø 100 mm
Bore size: Ø 25, 1" (25.4), 28, 30, 32, 35, 36, 38, 40, 42, 45 mm,
Protection rating: up to IP55 all around,
Resolution: up to 20,480 PPR,
Signal shape: square-wave or sine/cosine.
Thru-Bore Encoder incremental quadrature, optical,
WDG 100G: Ø 100 mm
Bore size: Ø 25, 1" (25.4), 28, 30, 32, 35, 36, 38, 40, 42, 45 mm,
Protection rating: IP50,
Resolution: up to 20,480 ppr,
Signal shape: square-wave or sine/cosine.
Thru-Bore Encoder incremental quadrature, optical,
WDG 100I: Ø 100 mm
Balanced stainless steel clamping ring,
Bore size with insulating sleeve: Ø 25, 30, 32, 38, 40, 42 mm,
Protection rating: up to IP55 all around,
Resolution: up to 20,480 PPR,
Signal shape: square-wave or sine/cosine.
Thru-Bore Encoder incremental quadrature, optical,
WDG 145H: Ø 145 mm
Bore size: Ø 45, 48, 50, 55, 60, 65, 72 mm,
Protection rating: IP54, optional IP64
Resolution: 1024 ppr, 2500 ppr,
Signal shape: square-wave.
Absolute shaft encoder, magnetic, CANopen WDGA 36A
Synchro flange;
Housing: Ø 36 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, 8 mm;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute hollow bore (blind) encoder, magnetic, CANopen WDGA 36E
Housing: Ø 36 mm
16/43-bit Single-turn/Multi-turn;
Bore size: Ø 6 mm, Ø 1/4";
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute hollow bore (blind) encoder, magnetic, CANopen WDGA 36E
Housing: Ø 36 mm
16/43-bit Single-turn/Multi-turn;
Bore size: Ø 8, 10, 12, 14, 15 mm;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder, magnetic, CANopen WDGA 58A
Synchro flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm / Ø 10 mm;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder, magnetic, CANopen WDGA 58A
Galvanic isolation
Synchro flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8"
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder, magnetic, CANopen WDGA 58B
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 10 mm;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder, magnetic, CANopen WDGA 58B
Galvanic isolation;
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Communication Profile according to CiA 301;
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder, magnetic, CANopen WDGA 58D
Galvanic isolation;
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm;
Communication Profile according to CiA 301;
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute hollow bore (blind) encoder, magnetic, CANopen WDGA 58E
Housing: Ø 58 mm
16/43 Single-turn/Multi-turn;
hollow bore blind: Ø 12 mm, Ø 14, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute hollow bore (blind) encoder,
magnetic, CANopen WDGA 58E
Galvanic isolation
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
hollow bore: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder, magnetic, CANopen WDGA 58S,
Salt mist IEC 60068-2-11
High pressure / steam cleaning
Corrosion resistance
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder, magnetic, CANopen WDGA 58V
Especially for food and beverage industry
Acid- and alkaline resistance
High pressure / steam cleaning
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code
Absolute shaft encoder, magnetic, CANopen LIFT WDGA 58A
Galvanic isolation
Synchro flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8"
Communication Profile according to CiA 301
Application Profile CANopen Lift CiA 417;
binary code
Absolute shaft encoder, magnetic,
CANopen LIFT WDGA 58B
Clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm;
Communication Profile according to CiA 301
Application Profile CANopen Lift CiA 417;
binary code
Absolute shaft encoder, magnetic, CANopen LIFT WDGA 58B;
with connector D-SUB, 9-pin;
Galvanic isolation;
Clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Communication Profile according to CiA 301
Application Profile CANopen Lift CiA 417;
binary code
Absolute shaft encoder, magnetic, CANopen LIFT WDGA 58D
Galvanic isolation;
Heavy duty;
Clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm;
Communication Profile according to CiA 301
Application Profile CANopen Lift CiA 417;
binary code
Absolute hollow bore (blind) encoder, magnetic,
CANopen Lift WDGA 58E
Housing: Ø 58 mm
16/32 Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Communication Profile according to CiA 301
Device Profile for encoder CiA 417 V2.0;
binary code
Absolute hollow bore (blind) encoder,
magnetic, CANopen LIFT WDGA 58E
Galvanic isolation
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Communication Profile according to CiA 301
Application Profile CANopen Lift CiA 417;
binary code
Absolute shaft encoder, magnetic, CAN SAE J1939 WDGA 36A
Synchro flange;
Housing: Ø 36 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, 8 mm
Absolute encoder, magnetic, CAN SAE J1939 WDGA 36E
hollow bore (blind)
Housing: Ø 36 mm
16/32-bit Single-turn/Multi-turn;
Hollow bore (blind): Ø 6 mm, Ø 1/4"
Absolute encoder, magnetic, CAN SAE J1939 WDGA 36E
hollow bore (blind)
Housing: Ø 36 mm
16/32-bit Single-turn/Multi-turn;
Hollow bore (blind): Ø 8, 10, 12, 14, 15 mm
Absolute shaft encoder, magnetic, CAN SAE J1939 WDGA 58A
Synchro flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm / Ø 10 mm
Absolute shaft encoder, magnetic, CAN SAE J1939 WDGA 58A
Galvanic isolation
Synchro flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8"
Absolute shaft encoder, magnetic, CAN SAE J1939 WDGA 58B
clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm / Ø 10 mm
Absolute shaft encoder, magnetic, CAN SAE J1939 WDGA 58B
Galvanic isolation
Clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn ;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8"
Absolute shaft encoder, magnetic, CAN SAE J1939 WDGA 58D
Galvanic isolation
Clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm
Absolute encoder, magnetic, CAN SAE J1939 WDGA 58E
Hollow bore (blind);
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve
Absolute hollow bore (blind) encoder,
magnetic, CAN SAE J1939 WDGA 58E
Galvanic isolation
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve
Absolute shaft encoder, magnetic, SAE J1939 WDGA 58S,
Salt mist IEC 60068-2-11
High pressure / steam cleaning
Acid- and alkaline resistance
Clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm
Absolute shaft encoder, magnetic, CAN SAE J1939 WDGA 58V,
Especially for food and beverage industry
Acid- and alkaline resistance
High pressure / steam cleaning
Clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm
Absolute shaft encoder, magnetic, SSI WDGA 36A
Synchro flange;
Housing: Ø 36 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, 8 mm
binary or gray code
Absolute hollow bore (blind) encoder, magnetic, SSI WDGA 36E
Housing: Ø 36 mm
16/43-bit Single-turn/Multi-turn;
hollow bore (blind): Ø 6 mm, Ø 1/4"
binary or gray code
Absolute hollow bore (blind) encoder, magnetic, SSI WDGA 36E
Housing: Ø 36 mm
16/43-bit Single-turn/Multi-turn;
hollow bore (blind): Ø 8, 10, 12, 14, 15 mm;
binary or gray code
Absolute shaft encoder, magnetic, SSI WDGA 58A
Synchro flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm / Ø 10 mm
binary or gray code
Absolute shaft encoder, magnetic, SSI WDGA 58B
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm / Ø 10 mm
binary or gray code
Absolute encoder, magnetic, SSI WDGA 58E
hollow shaft (blind);
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
binary or gray code
Absolute shaft encoder, magnetic, SSI WDGA 58S
Salt mist IEC 60068-2-11
High pressure / steam cleaning
corrosion resistance
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm;
binary or gray code
Absolute shaft encoder, magnetic, SSI WDGA 58V
Especially for food and beverage industry
Acid- and alkaline resistance
High pressure / steam cleaning
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm;
binary or gray code
Absolute shaft encoder, magnetic, RS485 WDGA 36A
Synchro flange;
Housing: Ø 36 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, 8 mm;
CRC checksum
Absolute hollow bore (blind) encoder, magnetic, RS485 WDGA 36E
Housing: Ø 36 mm
16/32-bit Single-turn/Multi-turn;
hollow bore (blind): Ø 6 mm, Ø 1/4",
CRC checksum
Absolute hollow bore (blind) encoder, magnetic, RS485 WDGA 36E
Housing: Ø 36 mm
16/32-bit Single-turn/Multi-turn;
hollow bore (blind): Ø 8, 10, 12, 14, 15 mm
CRC checksum
Absolute shaft encoder, magnetic, RS485 WDGA 58A
Synchro flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm / Ø 10 mm
CRC checksum
Absolute shaft encoder, magnetic, RS485 WDGA 58B
Clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm / Ø 10 mm
CRC checksum
Absolute encoder, magnetic, RS485 WDGA 58E
hollow bore (blind);
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
CRC checksum
Absolute shaft encoder, magnetic, RS485 WDGA 58V,
Especially for food and beverage industry
Acid- and alkaline resistance
High pressure / steam cleaning
Clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm
CRC checksum
Absolute shaft encoder, magnetic, RS485 WDGA 58V,
Especially for food and beverage industry
Acid- and alkaline resistance
High pressure / steam cleaning
Clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm
CRC checksum
Absolute shaft encoder, magnetic,
PROFIBUS-DP WDGA 58A
Bus cover: connection clamps or 3x M12 connector
Synchro flange;
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: PROFIBUS-DPV0/V2;
Device Profile: switchable, Class 1, 2, 3, 4;
Line-Driver: galvanic isolated
Absolute shaft encoder, magnetic,
PROFIBUS-DP WDGA 58A
Connection: connector
Synchro flange;
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: PROFIBUS-DPV0/V2;
Device Profile: switchable, Class 1, 2, 3, 4;
Line-Driver: galvanic isolated
Absolute shaft encoder, magnetic,
PROFIBUS-DP WDGA 58B
Bus cover: connection clamps or 3x M12 connector
Clamping flange;
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: PROFIBUS-DPV0/V2;
Device Profile: switchable, Class 1, 2, 3, 4;
Line-Driver: galvanic isolated
Absolute shaft encoder, magnetic,
PROFIBUS-DP WDGA 58B
Connection: connector
Clamping flange;
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: PROFIBUS-DPV0/V2;
Device Profile: switchable, Class 1, 2, 3, 4;
Line-Driver: galvanic isolated
Absolute shaft encoder, magnetic,
PROFIBUS-DP WDGA 58D
Heavy Duty;
Bus cover: connection clamps or 3x M12 connector;
Clamping flange;
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm
Protocol: PROFIBUS-DPV0/V2;
Device Profile: switchable, Class 1, 2, 3, 4;
Line-Driver: galvanic isolated
Absolute shaft encoder, magnetic,
PROFIBUS-DP WDGA 58D
Heavy Duty
Connection: connector
Clamping flange;
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm
Protocol: PROFIBUS-DPV0/V2;
Device Profile: switchable, Class 1, 2, 3, 4;
Line-Driver: galvanic isolated
Absolute hollow bore (blind) encoder, magnetic,
PROFIBUS-DP WDGA 58E
Bus cover: connection clamps
or 3x M12 connector
hollow bore (blind);
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Protocol: PROFIBUS-DPV0/V2;
Device Profile: switchable, Class 1, 2, 3, 4;
Line-Driver: galvanic isolated
Absolute shaft encoder, magnetic,
PROFIBUS-DP WDGA 58E
Connection: connector
hollow bore (blind);
Housing: Ø 58 mm
14/39-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Protocol: PROFIBUS-DPV0/V2;
Device Profile: switchable, Class 1, 2, 3, 4;
Line-Driver: galvanic isolated
Absolute shaft encoder, magnetic,
PROFINET-IO WDGA 58A
Bus cover: connection 3x M12 connector
Synchro flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: PROFINET-IO (CC-C);
Device Profile: switchable, Class 3, 4
Absolute shaft encoder, magnetic,
PROFINET-IO WDGA 58B
Bus cover: connection 3x M12 connector
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: PROFINET-IO (CC-C);
Device Profile: switchable, Class 3, 4
Absolute shaft encoder, magnetic,
PROFINET-IO WDGA 58D
Heavy Duty;
Bus cover: connection 3x M12 connector;
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm
Protocol: PROFINET-IO (CC-C);
Device Profile: switchable, Class 3, 4
Absolute hollow bore (blind) encoder, magnetic,
PROFINET-IO WDGA 58E
Bus cover: 3x M12 connector
hollow bore (blind);
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Protocol: PROFINET-IO (CC-C);
Device Profile: switchable, Class 3, 4
Absolute shaft encoder, magnetic,
PROFINET-IO WDGA 58F
The most compact PROFINET encoder worldwide!
Bus cover: connection 3x M12 connector
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: PROFINET-IO (CC-C);
Device Profile: switchable, Class 3, 4
Absolute shaft encoder, magnetic,
EtherCAT WDGA 58A
Bus cover: connection 3x M12 connector
Synchro flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: EtherCAT;
Device Profile: CiA DS-406 V4.0.2, Class 3
Absolute shaft encoder, magnetic,
EtherCAT WDGA 58B
Bus cover: connection 3x M12 connector
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: EtherCAT;
Device Profile: CiA DS-406 V4.0.2, Class 3
Absolute shaft encoder, magnetic,
EtherCAT WDGA 58D
Heavy Duty;
Bus cover: connection 3x M12 connector;
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm
Protocol: EtherCAT;
Device Profile: CiA DS-406 V4.0.2, Class 3
Absolute hollow bore (blind) encoder, magnetic,
EtherCAT WDGA 58E
Bus cover: 3x M12 connector
hollow bore (blind);
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Protocol: EtherCAT;
Device Profile: CiA DS-406 V4.0.2, Class 3
Absolute shaft encoder, magnetic,
EtherCAT WDGA 58F
The most compact EtherCAT encoder worldwide!
Bus cover: connection 3x M12 connector
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: EtherCAT;
Device Profile: CiA DS-406 V4.0.2, Class 3
Absolute shaft encoder, magnetic,
Universal IE WDGA 58A
Bus cover: connection 3x M12 connector
Synchro flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: selectable (PROFINET-IO, EtherCAT)
Absolute shaft encoder, magnetic,
Universal IE WDGA 58B
Bus cover: connection 3x M12 connector
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: selectable (PROFINET-IO, EtherCAT)
Absolute shaft encoder, magnetic,
Universal IE WDGA 58D
Heavy Duty;
Bus cover: connection 3x M12 connector;
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 12 mm
Protocol: selectable (PROFINET-IO, EtherCAT)
Absolute hollow bore (blind) encoder, magnetic,
Universal IE WDGA 58E
Bus cover: 3x M12 connector
hollow bore (blind);
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Bore size: Ø 12 mm, Ø 14 mm, Ø 15 mm;
Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10 mm with adapter sleeve;
Protocol: selectable (PROFINET-IO, EtherCAT)
Absolute shaft encoder, magnetic,
Universal IE WDGA 58F
The most compact Universal IE encoder worldwide!
Bus cover: connection 3x M12 connector
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: selectable (PROFINET-IO, EtherCAT)
Motorfeedback WDGF 58M BiSS-C
Interface for singleturn BISS-C
Up to 2048 sin/cos per revolution
Shaft: cone 1/10
Housing: Ø 58 mm
Motorfeedback WDGF 58M SSI
Interfaces for singleturn SSI
Up to 2048 sin/cos per revolution
Shaft: cone 1/10
Housing: Ø 58 mm
Motorfeedback WDGF 58R BiSS-C
Interface for singleturn BISS-C
Up to 2048 sin/cos per revolution
Shaft: cone 1/10
with stator coupling
Housing: Ø 58 mm
Motorfeedback WDGF 58R SSI
Interfaces for singleturn SSI
Up to 2048 sin/cos per revolution
Shaft: cone 1/10
with stator coupling
Housing: Ø 58 mm