Absolute shaft encoder, magnetic, RS485 WDGA 58B
Clamping flange;
Housing: Ø 58 mm
16/32-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm / Ø 10 mm
CRC checksum

- EnDra® multiturn technology:
maintenance-free and environmentally friendly - Compact industrial model
- Interface: RS485
- Preset input
- Direction of counting changeable
- Status indicator LED
- EMC: EN 61000-6-2, EN 61000-6-3
up to 65,536 steps/360° (16 bit)
Multi-turn Resolutionup to 32 bit.
Advice: Attention: No option AAS = full IP67 version
Shaft length: L: 12 mm
Max. Permissible shaft loading radial: 125 N
Max. Permissible shaft loading axial: 120 N
Shaft length: L: 20 mm
Max. Permissible shaft loading radial: 220 N
Max. Permissible shaft loading axial: 120 N
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
Current consumption: typ. 80 mA
Power consumption: max. 0.44 W
Description | |
---|---|
L2 | axial, shield connected to encoder housing |
S- (GND) | WH |
S+ (DCin) | BN |
A (DATA+) | GY |
B (DATA-) | PK |
PRESET | BU |
DIR | RD |
Shield | housing |
Description | |
---|---|
K1 | radial, shield not connected |
S- (GND) | WH |
S+ (DCin) | BN |
A (DATA+) | GY |
B (DATA-) | PK |
PRESET | BU |
DIR | RD |
Shield | housing n. c. |
Description | |
---|---|
L3 | radial, shield connected to encoder housing |
S- (GND) | WH |
S+ (DCin) | BN |
A (DATA+) | GY |
B (DATA-) | PK |
PRESET | BU |
DIR | RD |
Shield | housing |
Description | |
---|---|
CB8 | axial, 8-pin, shield connected to encoder housing |
Description | |
---|---|
CC8 | radial, 8-pin, shield connected to encoder housing |
Description | |
---|---|
CH8 | radial, 8-pin, shield connected to encoder housing |
Description | |
---|---|
C5 | radial, 12-pin, shield connected to encoder housing |

Female connector KI-8-67-EIA:
Suitable for encoder absolute WDGA RS485
with connector outlet CB8 and CC8, 8 pin, IP67
Ready-made shielded connection cable
with female cable connector straight, shield connected.

Female connector KIA-8-67-EIA:
Suitable for encoder absolute WDGA RS485
with sensor connector outlet CB8 and CC8, 8 pin, IP67
Ready-made shielded connection cable
with female cable connector angular, shield connected.

Female connector KD-12-67-EIA:
Suitable for encoder absolute WDGA RS485
with connector outlet C5, 12 pin, IP67
Straight female connector or
straight connector with ready made cable.

Female connector KDA-12-67-EIA:
Suitable for encoder absloute WDGA RS485
with connector outlet C5, 12 pin, IP67
Angular female connector or
angular connector with ready made cable.
Insert any mountable.

Mounting angle MW58B
suitable for inkremental encoder WDGI 58B, 58K, 58D, WDG 58T and
absolute encoder WDGA 58B, WDGA 58D.

Square flange QF58B
suitable for incremental encoder WDG 58B and
absolute encoder WDGA 58B.

Clamping claw SP-3-00
suitable for incremental encoder WDG 40A, 50B, 58T, WDGI 58A, 58B, 58C, 58D, 58K, 63B and absolute encoder WDGA 36A, WDGA 58A, WDGA 58B.

Bellows coupling BK29
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm*.
Max. offset of shafts radial: ± 0,25 mm or ± 0,30 mm*
Torsion spring stiffness: 150 Nm/rad or 130 Nm/rad*

Double loop coupling DSK29
for encoder with shaft Ø 6 mm, 8 mm or 10 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

Double loop coupling DSK38
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

Double loop coupling DSK48
for encoder with shaft Ø 10 mm, 12 mm or 14 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.
The encoder WDG 58B RS485 can be supplied in a full IP67 version.
Max. RPM: 3500 min'-1
Permitted Shaft-Loading: axial 100 N; radial 110 N
Starting-torque: approx. 4 Ncm at ambient temperature
Here you find a list of our distributors worldwide