deenfresitcntr
WDGA 58A PROFIBUS-DP (con)

Absolute shaft encoder, magnetic,
PROFIBUS-DP WDGA 58A
Connection: connector
Synchro flange;
Housing: Ø 58 mm

14/39-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 3/8";
Protocol: PROFIBUS-DPV2;
Device Profile: switchable, Class 3, 4;
Line-Driver: galvanic isolated

Data sheet
Drehgeber WDGA58A PROFIBUS-Stecke
Highlights
  • EnDra®: maintenance-free and environmentally friendly
  • PROFIBUS, Single-turn/Multi-turn
  • Single-turn/Multi-turn (max. 14 bit/39 bit)
  • Forward-looking technology with 32 Bit processor
  • 2 colour-duo LED´s as indicator for operating condition
    and bus status
  • High shaft load up to 220 N radial, 120 N axial
  • Device Profile switchable, Class 3, 4
Product details
Flange
synchro flange
Housing
Ø 58 mm
steel case chrome-plated, magnetic shielding
Resolution
Single-turn Resolution

up to 16,384 steps/360° (14 bit)

Multi-turn Resolution

up to 39 bit

Shaft
Ø 6 mm
Advice: Attention: No option AAO = full IP67 version
Shaft length: L: 12 mm
Max. Permissible shaft loading radial: 125 N
Max. Permissible shaft loading axial: 120 N
Ø 8 mm
Advice: Attention: No option AAO = full IP67 version
Shaft length: L: 19 mm
Max. Permissible shaft loading radial: 125 N
Max. Permissible shaft loading axial: 120 N
Ø 10 mm
Shaft length: L: 20 mm
Max. Permissible shaft loading radial: 220 N
Max. Permissible shaft loading axial: 120 N
Ø 9.525 mm, Ø 3/8"
Advice: Attention: No option AAO = full IP67 version
Shaft length: L: 20 mm, L: 0.787 in
Max. Permissible shaft loading radial: 220 N, 22.434 kp
Max. Permissible shaft loading axial: 120 N, 12.237 kp
Max. operating speed
8000 rpm
Power supply
10 VDC up to 32 VDC
Current consumption: typ. 100 mA (24 VDC)
Power consumption: max. 2.5 W
Operating temperature
-40 °C up to +85 °C [-40 °F up to +176 °F]
Storage temperature
-40 °C up to +100 °C [-40 °F up to +212 °F]
Protection class
Housing: IP65, IP67; shaft sealed: IP65
Advice

Configuration software
 Software download


Your desired STEP file is not listed:
Request STEP file here

Description
DB4 axial, 1x M8, 4-pin; 1x M12, 5-pin; 1x M12, 4-pin,
Assignments
connector (A)M8x1, 4-pin
(+) Vcc1
n. c.2
GND3
GND4
Female connector (B)M12x1, 5-pin, B-coded
BUSOUT
5 V DP1
A2
GND DP3
B4
n. c.5
connector (C)M12x1, 4-pin, B-coded
BUSIN
n. c.1
A2
n. c.3
B4
Handbuch PROFIBUS-DP Handbuch Drehgeber encoder PROFIBUS
Handout PROFIBUS Absolute Encoder WDGA

  • Compact design
  • Very high shaft loading
  • Can be connected flexibly
  • Can be switched between class 3 and 4

Handout Absolute encoders WDGA
Handout Absolute encoders WDGA

  • Absolute encoders with flange Ø 36 mm / Ø 58 mm
  • Single-/Multiturn (16/43)
  • Ground-breaking technology 32 Bit processor
  • Very high shaft loading, IP67
  • EnDra® Multiturn technology: No gears, no battery
  • QuattroMag® Singleturn technology: High precision +/- 0,0878°

Short-Catalogue Encoders and systems
Short-Catalogue Encoders and systems

  • Incremental and absolute encoders
  • Digital shaft copying
  • Made in Germany
  • Motorfeedback
  • Position Measurement Systems

Delivery times and service
Delivery times and service

of Wachendorff Automation GmbH & Co. KG

Handbuch PROFIBUS-DP Handbuch Drehgeber encoder PROFIBUS
Manual WDGA PROFIBUS DP

Quickstart class 4 WDGA PROFIBUS DP
Quickstart class 4 WDGA PROFIBUS DP

Assembly instructions for WDGA absolute encoder PROFIBUS
Assembly instructions for WDGA absolute encoder PROFIBUS

GSD file software release V1.2
GSD file software release V1.2 (Class4 - up to DPV2)

GSD file for Class4 encoder release V1.2 WDGA absolut with Profibus DP (up to DPV2).

By downloading and using software and apps
from this homepage, I agree to the GTC and
the supplementary software clause.

Demo program for S7 controllers encoder PROFIBUS
Demo program for S7 controllers (Class4)

Demo program (for S7 controllers) for Class4 encoder WDGA absolute with Profibus DP.  
The demo program is just an example.

By downloading and using software and apps
from this homepage, I agree to the GTC and
the supplementary software clause.

PROFIBUS Certificate
PROFIBUS Certificate

Declaration from the PROFIBUS-Nutzerorganisation for the WDGA PROFIBUS for Wachendorff Automation GmbH & Co. KG

UL Certificates for Wachendorff Automation Products 2014-03-28
UL Certificates

for Wachendorff Automation products.

REACH regulation
REACH- and RoHS regulation of the EU

Information

ISO Zertifikat DIN EN 9001:2015
ISO Certificate DIN EN 9001:2015

SP300 Drehgeber Spannexzenter
SP-3-00

Clamping claw SP-3-00

suitable for incremental encoder WDG 40A, 50B, 58T, WDGI 58A, 58B, 58C, 58D, 58K, 63B, WDGP 36A, WDGP 58A, WDGP 58B and absolute encoder WDGA 36A, WDGA 58A, WDGA 58B.

STEP file

MG58A Drehgeber Montageglocke 01
MG58A

Mounting bell MG58A

suitable for incremental encoder WDGI 58A and
absolute encoder WDGA 58A.

STEP file

ST27 Kupplung Drehgeber
ST27

Jointed coupling ST27

for encoder with shaft Ø 6 mm or 10 mm

PK20 Kupplung Drehgeber
PK20

Slit coupling PK20

for encoder with shaft Ø 6 mm.

PK24 Kupplung Drehgeber
PK24

Slit coupling PK24

for encoder with shaft Ø 6 mm, 8 mm or 10 mm.

FSK22 Kupplung Drehgeber
FSK22

Spring disc coupling FSK22

for encoder with shaft Ø 6 mm, 10 mm or 12 mm.

WK22 Kupplung Drehgeber
WK22

Helical coupling WK22

for encoder with shaft Ø 6 mm.

WK24 Kupplung Drehgeber
WK24

Helical coupling WK24

for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm.

 STEP-Download WK240610

WK32 Kupplung Drehgeber
WK32

Helical coupling WK32

for encoder with shaft Ø 6 mm or 10 mm.

BK29 Kupplung Drehgeber
BK29

Bellows coupling BK29

for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm*.
Max. offset of shafts radial: ± 0,25 mm or ± 0,30 mm*
Torsion spring stiffness: 150 Nm/rad or 130 Nm/rad*

FB29B Kupplung Drehgeber
FB29B

Bellows coupling FB29B

for encoder with shaft Ø 4 mm, 6 mm, 8 mm, 10 mm or 12 mm.

DSK29 Kupplung Drehgeber
DSK29

Double loop coupling DSK29

for encoder with shaft Ø 6 mm, 8 mm or 10 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

 STEP Download DSK290606

 STEP Download DSK290610

DSK38 Kupplung Drehgeber
DSK38

Double loop coupling DSK38

for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

STEP-Datei DSK380606

DSK48 Kupplung Drehgeber
DSK48

Double loop coupling DSK48

for encoder with shaft Ø 10 mm, 12 mm or 14 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

STEP download DSK481012

Generally encoder specifications

Absolute encoder specifications

Electrical connection

Cable outlet
Connector
Connection cover
###field_abs_ah_bestcode###

Your configured order code

ShaftSingleturnMultiturnInterfaceSoftwareCodeSupplyGalv.ConnectionOption
WDGA 58ADPAB01DB4Empty
distributors
For further information please contact our local distributor.
Here you find a list of our distributors worldwide
You want to get an offer or want a recall. Request