Absolute shaft encoder, magnetic, CANopen WDGA 58S,
Salt mist IEC 60068-2-11
High pressure / steam cleaning
Corrosion resistance
Clamping flange;
Housing: Ø 58 mm
16/43-bit Single-turn/Multi-turn;
Shaft: Ø 10 mm;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code

- Resistance to salt mist (IEC 60068-2-11) succeeded
- Protection: IP67 + IP69k (high pressure / steam cleaning)
- Corrosion resistance
- EnDra®: maintenance-free and environmentally friendly
- CANopen, Single-turn/Multi-turn
- Communication Profile according to CiA 301
- Device Profile for encoder CiA 406 V3.2 class C2
- Single-turn/Multi-turn (16 bit/43 bit)
- Forward-looking technology with 32 Bit processor
- 2-colour-LED as indicator for operating condition and
error message appropriate CiA 303-3
65,536 steps/360° (16 bit)
Multi-turn Resolutionup to 32 bit with high precision value up to 43 bit.
Shaft length: L: 18 mm
Max. Permissible shaft loading radial: 100 N
Max. Permissible shaft loading axial: 100 N
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
LED signaling
Demonstration of the LED status signaling
Configuration software
Software download
Manual WDGA CANopen
Manual WDGA CANopen
Your desired STEP file is not listed:
Request STEP file here
Description | |
---|---|
CB5 | axial, 5-pin, shield connected to encoder housing |

Display Unit / and BCD Thumbwheel Switchset with
CANopen Interface
The WDG043ACOM display units have been designed to display single
parameters or registers (like position or speed) in systems using a CANopen
network for communication.
The encoder WDGA 58S CANopen is also available with fixed 120 Ohm terminating resistor.
Here you find a list of our distributors worldwide