deenfresitcntr
WDGA 36E SSI

Absolute hollow bore (blind) encoder, magnetic, SSI WDGA 36E
Housing: Ø 36 mm

16/43-bit Single-turn/Multi-turn;
Hollow bore blind: Ø 12 mm, Ø 14 mm, Ø 15 mm,
Ø 8 mm, 10 mm with adapter sleeve;
binary or gray code

Data sheet General technical data absolute encoders SSI (PDF 281 kB)
Drehgeber WDGA36ESSI-K15
Highlights
  • EnDra multiturn technology: maintenance-free and environmentally friendly
  • Compact industrial model
  • Interface: SSI (Synchronous-serial Interface)
  • Code: Binary- or Gray
  • Preset input
  • Direction of counting changeable
  • Status indicator LED
  • EMC: EN 61000-6-2, EN 61000-6-3
Product details
Flange
hollow shaft (blind-bored)
Housing
Ø 36 mm
stainless steel
Resolution
Single-turn Resolution

up to 65,536 steps/360° (16 bit)

Multi-turn Resolution

up to 43 bit.

Shaft
Ø 8 mm
Advice: with adapter sleeve
Insertion depth min.: 10 mm
Insertion depth max.: 14.5 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Ø 10 mm
Advice: with adapter sleeve
Insertion depth min.: 10 mm
Insertion depth max.: 14.5 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Ø 12 mm
Insertion depth min.: 10 mm
Insertion depth max.: 14.5 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Ø 14 mm
Insertion depth min.: 10 mm
Insertion depth max.: 14.5 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Ø 15 mm
Insertion depth min.: 10 mm
Insertion depth max.: 14.5 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Max. operating speed
6000 rpm
Power supply
4,75 VDC up to 32 VDC
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
4,75 VDC up to 5,5 VDC
Current consumption: typ. 80 mA
Power consumption: max. 0.44 W
Operating temperature
-40 °C up to +85 °C
Storage temperature
-40 °C up to +100 °C
Protection class
Housing: IP65, IP67; shaft sealed: IP65; cable outlet K1: IP40, K6: IP20
STEP viewer / STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
L2 axial, shield connected to encoder housing
Assignments
GNDWH
(+) VccBN
SSI CLK+GN
SSI CLK-YE
SSI DATA+GY
SSI DATA-PK
PRESETBU
DIRRD
Shieldhousing
STEP viewer / STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
L3 radial, shield connected to encoder housing
Assignments
GNDWH
(+) VccBN
SSI CLK+GN
SSI CLK-YE
SSI DATA+GY
SSI DATA-PK
PRESETBU
DIRRD
Shieldhousing
STEP viewer / STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
K1 radial, shield not connected
Assignments
GNDWH
(+) VccBN
SSI CLK+GN
SSI CLK-YE
SSI DATA+GY
SSI DATA-PK
PRESETBU
DIRRD
Shieldhousing n. c.
STEP viewer / STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
K6 axial, shield not connected
Assignments
GNDWH
(+) VccBN
SSI CLK+GN
SSI CLK-YE
SSI DATA+GY
SSI DATA-PK
PRESETBU
DIRRD
Shieldhousing n. c.
STEP viewer / STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
CB8 axial, 8-pin, shield connected to encoder housing
Assignments
GND1
(+) Vcc2
SSI CLK+3
SSI CLK-4
SSI DATA+5
SSI DATA-6
PRESET7
DIR8
Shieldhousing
STEP viewer / STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
CC8 radial, 8-pin, shield connected to encoder housing
Assignments
GND1
(+) Vcc2
SSI CLK+3
SSI CLK-4
SSI DATA+5
SSI DATA-6
PRESET7
DIR8
Shieldhousing
General technical Data and safety instructions absolute encoders WDGA SSI
General technical Data and safety instructions absolute encoders WDGA SSI

Motor feedback installation solutions
Motor feedback installation solutions with EnDra® Technology

...to be directly installed in motors.

Handout Absolute encoders WDGA
Handout Absolute encoders WDGA

  • Absolute encoders with flange Ø 36 mm / Ø 58 mm
  • Single-/Multiturn (16/43)
  • Ground-breaking technology 32 Bit processor
  • Very high shaft loading, IP67
  • EnDra® Multiturn technology: No gears, no battery
  • QuattroMag® Singleturn technology: High precision +/- 0,0878°

Short-Catalogue Encoders and systems
Short-Catalogue Encoders and systems

  • Incremental and absolute encoders
  • Digital shaft copying
  • Made in Germany
  • Motorfeedback
  • Position Measurement Systems

HALT Test
The HALT-Test

Delivery times and service
Delivery times and service

of Wachendorff Automation GmbH & Co. KG

Assembly instructions for WDGA absolute encoder SS
Assembly instructions for WDGA absolute encoder SSI

Technical Note deutsch
Technical Note WDGA SSI Basics

deutsch

Technical Note english
Technical Note WDGA SSI Basics

english

EC Konformitätserklärung Drehgeber : EC declaration of conformity encoder
EU declaration of conformity absolute encoder WDGA 2.0 CAN/SSI

for Wachendorff Automation GmbH & Co. KG.

UKCA declaration of conformity absolute encoder WDGA 2.0 CAN/SSI
UKCA declaration of conformity absolute encoder WDGA 2.0 CAN/SSI

for Wachendorff Automation GmbH & Co. KG.

UL Certificates for Wachendorff Automation Products 2014-03-28
UL Certificates

for Wachendorff Automation products.

REACH regulation
REACH- and RoHS regulation of the EU

Information

ISO Zertifikat DIN EN 9001:2015
ISO Certificate DIN EN 9001:2015

WDG053XIOM

SSI display unit for absolute encoders WDGA SSI with
Singleturn or Multiturn

with 4 presets and outputs

KI867SSI Drehgeber Kabeldose
KI-8-67-SSI

Female connector KI-8-67-SSI:
Suitable for encoder absolute WDGA SSI
with connector outlet CB8 and CC8, 8 pin, IP67

Ready-made shielded connection cable
with female cable connector straight, shield connected.

KIA867SSI Drehgeber Kabeldose
KIA-8-67-SSI

Female connector KIA-8-67-SSI:
Suitable for encoder absolute WDGA SSI
with sensor connector outlet CB8 and CC8, 8 pin, IP67.

Ready-made shielded connection cable
with female cable connector angular, shield connected.

WDGWA10M06 Drehgeber encoder Wellenadapter shaft adapter
WDGWA10M06

Shaft adapter WDGWA10M06

for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M6.

WDGWA10M08 Drehgeber Wellenadapter
WDGWA10M08

Shaft adapter WDGWA10M08

for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M8.

WDGWA10M10 Drehgeber Wellenadapter
WDGWA10M10

Shaft adapter WDGWA10M10

for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M10.

WDGWA10M12 Drehgeber Wellenadapter
WDGWA10M12

Shaft adapter WDGWA10M12

for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M12.

STEP file: WDGWA10M12.stp

WDGWA10M14 Drehgeber Wellenadapter
WDGWA10M14

Shaft adapter WDGWA10M14

for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M14.

WDGWA10M16 Drehgeber Wellenadapter
WDGWA10M16

Shaft adapter WDGWA10M16

for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M16.

STEP file: WDGWA10M16.stp

WDGWA10M20 Drehgeber Wellenadapter
WDGWA10M20

Shaft adapter WDGWA10M20

for thru-bore and hollow bore (blind) encoder Ø 10 mm
or couplings Ø 10 mm,
thread M20.

Generally encoder specifications

Absolute encoder specifications

Electrical connection

Cable outlet
Connector
Connection cover
###field_abs_ah_bestcode###

Your configured order code

ShaftSingleturnMultiturnInterfaceSoftwareCodeSupplyGalv.Connection
WDGA 36ESIA1
distributors
For further information please contact our local distributor.
Here you find a list of our distributors worldwide
You want to get an offer or want a recall. Request