Drehgeber WDG53V
WDG 53V

Shaft Encoder incremental quadrature, optical, WDG 53V,
Screw flange: Ø 53 mm
(WDG 53V substitutes WDG 53S)

Shaft: Ø 6 mm,
protection rating: IP68 all around,
resolution: up to 1500 ppr,
Signal shape: square-wave.

    Product data

    Highlights
    • Extremely rugged and economical encoder with short measurements
    • Easy screw mounting
    • Protection to IP68 all around
    • Optional: -40 °C up to +85 °C
    Product details
    Flange
    screw flange
    Max. pulses per revolution PPR
    up to 1500 PPR
    Housing
    Ø 53 mm
    stainless steel, V2A
    Shaft
    Ø 6 mm
    Shaft length: L: 13 mm
    Max. Permissible shaft loading radial: 30 N
    Max. Permissible shaft loading axial: 45 N
    Max. operating speed
    6000 rpm
    Output circuit
    TTL, RS422 compatible, inv.
    HTL
    Output frequency
    TTL ≤ 1500 ppr, max. 200 kHz
    HTL ≤ 1500 ppr, max. 200 kHz
    Power supply
    4,75 VDC up to 5,5 VDC
    Current consumption: typ. 70 mA
    10 VDC up to 30 VDC
    Current consumption: typ. 70 mA
    Operating temperature
    -20 °C up to +80 °C
    Protection class
    IP68

    Drawings and STEP-Data

    Cable connection K2, L2 with 2 m cable

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    K2 axial, shield not connected
    L2 axial, shield connected to encoder housing
    Assignments
     K2, L2K2, L2
    CircuitH05, H24R05, R24
    GNDWHWH
    (+) VccBNBN
    AGNGN
    BYEYE
    NGYGY
    Light reserve warning--
    A inv.-RD
    B inv.-BK, (BU at ACA)
    N inv.-VT
    Shieldflexflex

    Sensor-connector (M12x1) SB, 4-, 5-, 8-pin

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    SB4 axial, 4-pin, Connector connected to encoder housing-
    SB5 axial, 5-pin, Connector connected to encoder housing-
    SB8 axial, 8-pin, Connector connected to encoder housing
    Assignments
    SB4SB5SB8SB8
     4-pin5-pin8-pin8-pin
    connector drawing
    CircuitH05, H24H05, H24H05, H24R05, R24
    GND3311
    (+) Vcc1122
    A2433
    B4244
    N-555
    Light reserve warning----
    A inv.---6
    B inv.---7
    N inv.---8
    n. c.--6, 7, 8-
    Shield----

    Output circuits

    up to 2500 PPR

    H05: 4.75 - 5.5 VDC, TTL, without light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL
    Channels
    AB, ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    no
    Light reserve warning
    no

    R05: 4.75 - 5.5 VDC, TTL, RS422 comp., inverted, without light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL, RS422 comp., inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    no
    Light reserve warning
    no

    H24: 10 - 30 VDC, HTL, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL
    Channels
    AB, ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    yes
    Light reserve warning
    no

    R24: 10 - 30 VDC, HTL inverted, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    yes
    Light reserve warning
    no

    Options

    ACA: Low temperature

    The encoder WDG 53V with the output circuit types H24, R24 is also available with the extended temperature range -40 °C up to +80 °C (measured at the flange).

    XXX = Decimeter: Cable length

    The encoder WDG 53V can be supplied with more than 2 m cable. The maximum cable length depends on the supply voltage and the frequency; see 'General Technical Data'
    Please extend the standard order code with a three figure number, specifying the cable length in decimetres.
    Example: 5 m cable = 050

    Accessories

    For incremental encoders female connectors / cable with female connector

    KI467 Drehgeber Kabeldose
    KI-4-67

    Female connector KI-4-67:
    Suitable for encoder with sensor connector outlet SB4 and SC4, 4 pin, IP67

    Ready-made shielded connection cable with female cable connector straight,
    shield connected.

    KIA467 Drehgeber Kabeldose
    KIA-4-67

    Female connector KIA-4-67:
    Suitable for encoder with sensor connector outlet SB4 and SC4, 4 pin, IP67

    Ready-made shielded connection cable with female cable connector angular,
    shield connected.

    KI567 Drehgeber Kabeldose
    KI-5-67

    Female connector KI-5-67:
    Suitable for encoder with sensor connector outlet SB5 and SC5, 5 pin, IP67

    Ready-made shielded connection cable with female cable connector straight,
    shield connected.

    KIA567 Drehgeber Kabeldose
    KIA-5-67

    Female connector KIA-5-67:
    Suitable for encoder with sensor connector outlet SB5 and SC5, 5 pin, IP67

    Ready-made shielded connection cable with female cable connector angular,
    shield connected.

    KI867 Drehgeber Kabeldose
    KI-8-67

    Female connector KI-8-67:
    Suitable for encoder with sensor connector outlet SB8 and SC8, 8 pin, IP67

    Ready-made shielded connection cable with female cable connector straight,
    shield connected.

    KIA867 Drehgeber Kabeldose
    KIA-8-67

    Female connector KIA-8-67:
    Suitable for encoder with sensor connector outlet SB8 and SC8, 8 pin, IP67

    Ready-made shielded connection cable with female cable connector angular,
    shield connected.

    You want to get an offer or want a recall.
    distributors
    For further information please contact our local distributor.
    Here you find a list of our distributors worldwide