Drehgeber WDG58V
WDG 58V

Shaft Encoder incremental quadrature, optical, WDG 58V,
Clamping flange: Ø 58 mm

Especially for food and beverage industry
Acid- and alkaline resistance

Shaft: Ø 10 mm,
Protection rating: IP67 + IP69K,
Resolution: up to 25000 ppr,
Signal shape: square-wave or sine/cosine.

    Product data

    Highlights
    • EHEDG: Tested hygienic design
    • Resistance to Salt mist acc. (IEC 60068-2-11)
    • Up to 25000 PPR by use of high grad electronics
    • Ecolab: Certificate on resistance to cleaning and disinfection agents
    • High protection rating IP67 all around and IP69K
      (high pressure / steam cleaning)
    • Radial shaft sealing ring with no dead-room (PTFE)
    • Full connection protection with 10 VDC up to 30 VDC
    • With light reserve warning
    Product details
    Flange
    clamping flange
    Max. pulses per revolution PPR
    up to 25000 PPR
    Housing
    Ø 58 mm
    stainless steel, V4A
    Shaft
    Ø 10 mm
    Shaft length: L: 18 mm
    Max. Permissible shaft loading radial: 100 N
    Max. Permissible shaft loading axial: 100 N
    Max. operating speed
    3600 rpm
    Output circuit
    TTL
    TTL, RS422 compatible, inv.
    HTL
    HTL, inv.
    1 Vpp sin/cos
    Output frequency
    TTL ≤ 5000 ppr, max. 200 kHz
    HTL ≤ 5000 ppr, max. 200 kHz
    TTL more than 1200 ppr, max. 2 MHz
    HTL more than 1200 ppr, max. 600 kHz
    1 Vpp sin/cos, max. 100 kHz
    Power supply
    4,75 VDC up to 5,5 VDC
    Current consumption: typ. 100 mA
    5 VDC up to 30 VDC
    Current consumption: typ. 70 mA
    10 VDC up to 30 VDC
    Current consumption: typ. 100 mA
    Operating temperature
    -20 °C up to +80 °C
    1 Vpp: -10 °C up to +70 °C
    Protection class
    IP67 all around and IP69K. Resistance to salt mist (IEC 60068-2-11) after 672 hours.

    Drawings and STEP-Data

    Cable connection K2, L2 with 2 m cable

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    K2 axial, shield not connected
    L2 axial, shield connected to encoder housing
    Assignments
     K2, L2K2, L2K2, L2K2, L2L2
    CircuitG05, G24F05, H05, F24, H24, H30I05, I24, 524P05, R05, P24, R24, 245, 645, R30SIN
    GNDWHWHWHWHWH
    (+) VccBNBNBNBNBN
    AGNGNGNGNGN
    BYEYEYEYEGY
    NGYGYGYGY-
    Light reserve warningPK-PK--
    A inv.--RDRDYE
    B inv.--BUBUPK
    N inv.--VTVT-
    Shieldflexflexflexflexflex

    Cable connection K3, L3 with 2 m cable

    STEP data:

    Your desired STEP file is not listed:
    Request STEP file here

    Description ABN inv. poss.
    K3 radial, shield not connected
    L3 radial, shield connected to encoder housing
    Assignments
     K3, L3K3, L3K3, L3K3, L3L3
    CircuitG05, G24F05, H05, F24, H24, H30I05, I24, 524P05, R05, P24, R24, 245, 645, R30SIN
    GNDWHWHWHWHWH
    (+) VccBNBNBNBNBN
    AGNGNGNGNGN
    BYEYEYEYEGY
    NGYGYGYGY-
    Light reserve warningPK-PK--
    A inv.--RDRDYE
    B inv.--BUBUPK
    N inv.--VTVT-
    Shieldflexflexflexflexflex

    Output circuits

    up to 2500 PPR

    H30: 5 - 30 VDC, HTL, without light reserve warning

    Power supply VDC
    5 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL
    Channels
    AB, ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 10 % Vcc
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    inverse-polarity protection only
    Light reserve warning
    no

    R30: 5 - 30 VDC, HTL inverted, without light reserve warning

    Power supply VDC
    5 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 10 % Vcc
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    inverse-polarity protection only
    Light reserve warning
    no

    up to 5000 PPR

    G05: 4.75 - 5.5 VDC, TTL, with light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL
    Channels
    ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    no
    Light reserve warning
    yes

    H05: 4.75 - 5.5 VDC, TTL, without light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL
    Channels
    AB, ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    no
    Light reserve warning
    no

    I05: 4.75 - 5.5 VDC, TTL, RS422 comp., inverted, with light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL, RS422 comp., inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    no
    Light reserve warning
    yes

    R05: 4.75 - 5.5 VDC, TTL, RS422 comp., inverted, without light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL, RS422 comp., inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    no
    Light reserve warning
    no

    G24: 10 - 30 VDC, HTL, with light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL
    Channels
    AB, ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    yes
    Light reserve warning
    yes

    H24: 10 - 30 VDC, HTL, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL
    Channels
    AB, ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    yes
    Light reserve warning
    no

    I24: 10 - 30 VDC, HTL inverted, with light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    yes
    Light reserve warning
    yes

    R24: 10 - 30 VDC, HTL inverted, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    HTL inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    yes
    Light reserve warning
    no

    524: 10 - 30 VDC, TTL, RS422 comp., inverted, with light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL, RS422 comp., inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 1.2 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    inverse-polarity protection only
    Light reserve warning
    yes

    245: 10 - 30 VDC, TTL, RS422 comp., inverted, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 70 mA
    Signal shape
    square-wave
    Output circuit
    TTL, RS422 comp., inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 1.2 VDC
    Output frequency
    max. 200 kHz
    Circuit protection
    inverse-polarity protection only
    Light reserve warning
    no

    (higher frequency) 1200 up to 25000 PPR

    F05: 4.75 - 5.5 VDC, TTL, without light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 100 mA
    Signal shape
    square-wave
    Output circuit
    TTL
    Channels
    AB, ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 2 MHz
    Circuit protection
    no
    Light reserve warning
    no

    P05: 4.75 - 5.5 VDC, TTL, RS422 comp., inverted, without light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 100 mA
    Signal shape
    square-wave
    Output circuit
    TTL, RS422 comp., inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 0.5 VDC
    Output frequency
    max. 2 MHz
    Circuit protection
    no
    Light reserve warning
    no

    F24: 10 - 30 VDC, HTL, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 100 mA
    Signal shape
    square-wave
    Output circuit
    HTL
    Channels
    ABN
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 600 kHz
    Circuit protection
    yes
    Light reserve warning
    no

    P24: 10 - 30 VDC, HTL inverted, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 100 mA
    Signal shape
    square-wave
    Output circuit
    HTL inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > Vcc - 2.5 VDC
    Signal level L<
    L < 2.5 VDC
    Output frequency
    max. 600 kHz
    Circuit protection
    yes
    Light reserve warning
    no

    645: 10 - 30 VDC, TTL, RS422 comp., inverted, without light reserve warning

    Power supply VDC
    10 - 30 VDC
    Current consumption
    typ. 100 mA
    Signal shape
    square-wave
    Output circuit
    TTL, RS422 comp., inverted
    Channels
    AB, ABN, and inverted signals
    Output
    push-pull
    Load
    max. 40 mA / channel
    Signal level mA
    at 20 mA
    Signal level H>
    H > 2.5 VDC
    Signal level L<
    L < 1.2 VDC
    Output frequency
    max. 2 MHz
    Circuit protection
    inverse-polarity protection only
    Light reserve warning
    no

    1024, 2048 PPR

    SIN: 4.75 - 5.5 VDC, 1 Vpp sin/cos, without light reserve warning

    Power supply VDC
    4.75 - 5.5 VDC
    Current consumption
    typ. 100 mA without load
    Signal shape
    sinus
    Output circuit
    1 Vpp sin/cos
    Channels
    AB
    Output
    Sinus, Cosinus
    Load
    @ 1 Vpp sin/cos: min. 120 Ohm
    Signal level
    1 Vpp +/- 25 %
    Output frequency
    max. 100 kHz
    Circuit protection
    no
    Cabel lenght max.
    max. 150 m at <260 pF/m
    Light reserve warning
    no

    Options

    XXX = Decimeter: Cable length

    The encoder WDG 58V can be supplied with more than 2 m cable. The maximum cable length depends on the supply voltage and the frequency; see 'General Technical Data'
    Please extend the standard order code with a three figure number, specifying the cable length in decimetres.
    Example: 5 m cable = 050

    Accessories

    You want to get an offer or want a recall.
    distributors
    For further information please contact our local distributor.
    Here you find a list of our distributors worldwide