|
|
 |
|
|
WDGA-58A-SSI
Absolute shaft encoder, magnetic, SSI WDGA 58A
Synchro flange;
Housing: Ø 58 mm
14/40-bit Single-/Multiturn;
Shaft: Ø 6 mm / Ø 10 mm
binary or gray code
Data sheet (PDF 696 KB)
|
|
|
|
| Highlights |
- EnDra multiturn technology: maintenance-free and environmentally friendly
- Compact industrial model
- Interface: SSI (Synchronous-serial Interface)
- Single-/Multiturn
- Max. 16,384 steps per revolution (14 bit)
- Max. 10 ¹² revolutions (40 bit)
- Code: Binary- or Gray
- Preset input
- Direction of counting changeable
- Status indicator LED
- EMC: EN 61000-6-2, EN 61000-6-3
|
| Product details |
|
| Housing |
steel case chrome-plated,
magnetic shielding |
| Resolution |
14 bit (40 bit multiturn) |
| Shaft |
Ø 6 mm / Ø 10 mm
Lenght: 12 mm / 20 mm |
| Max. operating speed |
8.000 min-1 |
| Permitted load on shaft end |
120 N Fa
125 N / 220 N Fr |
| Power supply |
10 VDC up to 30 VDC
4,75 VDC up to 5,5 VDC
max. 80 mA |
| Current consumption |
max. 0.8 W |
| Operating temperature |
-40 °C up to + 80 °C |
| Storage temperature |
-40 °C up to + 100 °C |
| Protection rating |
IP67, shaft sealed to IP65
Cable outlet K1: IP40 |
| Indicators and analysis equipment for absolute encoders WDGA |
|
|
WDGA-58A-SSI
SSI display unit for absolute encoders WDGA SSI with Singleturn or Multiturn
SSI display unit with two presets and outputs
|
 DETAILS
|
| For absolute encoders female connectors / cable with female connector |
|
|
WDGA-58A-SSI
Female connector KI-8-67-SSI:
Suitable for encoder absolute WDGA SSI
with connector outlet CB8 and CC8, 8 pin, IP67
Ready-made shielded connection cable
with female cable connector straight, shield connected.
|
DETAILS
|
|
|
WDGA-58A-SSI
Female connector KIA-8-67-SSI:
Suitable for encoder absolute WDGA SSI
with sensor connector outlet CB8 and CC8, 8 pin, IP67
Ready-made shielded connection cable
with female cable connector angular, shield connected.
|
DETAILS
|
|
|
WDGA-58A-SSI
Female connector KD-8-67-SSI:
Suitable for encoder absolute WDGA SSI
with connector outlet CH8, 8 pin, IP67
Straight female connector or
straight female connector with ready made cable.
|
DETAILS
|
|
|
WDGA-58A-SSI
Female connector KDA-8-67-SSI:
Suitable for encoder with connector outlet CH8, 8 pin, IP67
Angular female connector or
angular connector with ready made cable.
Insert any mountable.
|
DETAILS
|
|
|
WDGA-58A-SSI
Female connector KD-12-67-SSI:
Suitable for encoder absolute WDGA SSI
with connector outlet C5, 12 pin, IP67
Straight female connector or
straight connector with ready made cable.
|
DETAILS
|
|
|
WDGA-58A-SSI
Female connector KDA-12-67:
Suitable for encoder absloute SSI
with connector outlet C5, 12 pin, IP67
Angular female connector or
angular connector with ready made cable.
Insert any mountable.
|
DETAILS
|
|
|
WDGA-58A-SSI
Clamping claw SP-3-00
suitable for incremental encoder WDG 58A, 58B, 58C, 58D, 58K, 63B and
absolute encoder WDGA 36A, WDGA 58A, WDGA 58B.
|
DETAILS
|
|
|
WDGA-58A-SSI
Mounting bell MG58A
suitable for incremental encoder WDG 58A and
absolute encoder WDGA 58A.
|
DETAILS
|
|
|
WDGA-58A-SSI
Jointed coupling ST27
for encoder with shaft Ø 6 mm or 10 mm
|
DETAILS
|
|
|
WDGA-58A-SSI
Slit coupling PK20
for encoder with shaft Ø 6 mm.
|
DETAILS
|
|
|
WDGA-58A-SSI
Slit coupling PK24
for encoder with shaft Ø 6 mm, 8 mm or 10 mm.
|
DETAILS
|
|
|
WDGA-58A-SSI
Spring disc coupling FSK22
for encoder with shaft Ø 6 mm, 10 mm or 12 mm.
|
DETAILS
|
|
|
WDGA-58A-SSI
Helical coupling WK22
for encoder with shaft Ø 6 mm.
|
DETAILS
|
|
|
WDGA-58A-SSI
Helical coupling WK24
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm.
|
DETAILS
|
|
|
WDGA-58A-SSI
Helical coupling WK32
for encoder with shaft Ø 6 mm or 10 mm.
|
DETAILS
|
|
|
WDGA-58A-SSI
Bellows coupling BK29
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm*.
Max. offset of shafts radial: ± 0,25 mm or ± 0,30 mm*
Torsion spring stiffness: 150 Nm/rad or 130 Nm/rad*
|
DETAILS
|
|
|
WDGA-58A-SSI
Bellows coupling FB29B
for encoder with shaft Ø 4 mm, 6 mm, 8 mm, 10 mm or 12 mm.
|
DETAILS
|
|
|
WDGA-58A-SSI
Paguflex coupling PF26 type 10
for encoder with shaft Ø 6 mm or 8 mm.
|
DETAILS
|
|
|
WDGA-58A-SSI
Paguflex coupling type 20
for encoder with shaft Ø 10 mm or 12 mm.
|
DETAILS
|
|
|
For further information please contact our local distributor, please.
Here you find a list of our
distributors worldwide
|
|
|
|