|
|
 |
|
|
WDGA-36E-CANopen
Absolute hollow bore (blind) encoder, magnetic, CANopen WDGA 36E
Housing: Ø 36 mm
14/18-bit Single-/Multiturn;
Bore size: Ø 6 mm;
Communication Profile according to CiA 301
Device Profile for encoder
CiA 406 V3.2 class C2;
binary code
Data sheet (PDF 201 KB)
|
|
|
|
| Highlights |
- Single-/Multiturn
- Max. 16,384 steps per revolution (14 bit)
- Max. 262,144 revolutions (18 bit)
- CANopen
- Communication Profile according to CiA 301
- Device Profile for encoder
CiA 406 V3.2 class C2
- Status indicator LED (CiA 303-3)
- Configurable without field bus hood via LSS
(CiA 305) or optional via SDO
- Extensive CANopen functionality
- Positions-, Speed- and Accellerationsobjects
- Work area supervision and Encoder cams
- up to 4 Transmit PDO´s individually configurable
- Scale functions
- Heartbeat, Nodeguarding and
extensive diagnostics
|
| Product details |
|
| Housing |
steel case chrome-plated,
magnetic shielding |
| Resolution |
14 bit (18 bit multiturn) |
| Baud rate |
max. 1 MBaud with automatic bit rate detection |
| Shaft |
Ø 6 mm |
| Max. operating speed |
12.000 min-1 |
| Permitted load on shaft end |
50 N Fa
80 N Fr |
| Insertion depth |
min. 8 mm
max. 17 mm |
| Power supply |
10 VDC up to 30 VDC |
| Operating temperature |
-40 °C up to + 80 °C |
| Storage temperature |
-40 °C up to + 100 °C |
| Protection rating |
IP67, shaft sealed to IP65 |
| LED signaling |
Demonstration of the LED status signaling |
| Indicators and analysis equipment for absolute encoders WDGA |
|
|
WDGA-36E-CANopen
Display Unit / and
BCD Thumbwheel Switchset
with CANopen Interface
The WDG043ACOM display units have been
designed to display single parameters or
registers (like position or speed) in
systems using a CANopen network for
comminication.
|
DETAILS
|
| For absolute encoders female connectors / cable with female connector |
|
|
WDGA-36E-CANopen
Self-assembly connector KIS-5-67:
M12 x 1, suitable for encoder WDGA,
5-pin, IP67
Straigth connector
|
DETAILS
|
|
|
WDGA-36E-CANopen
Self-assembly connector KISA-5-67:
M12 x 1, suitable for encoder WDGA,
5-pin, IP67
Angular connector
|
DETAILS
|
|
|
WDGA-36E-CANopen
Self-assembly female connector KID-5-67:
M12 x 1, suitable for encoder WDGA,
5-pin, IP67
Straigth female connector
|
DETAILS
|
|
|
WDGA-36E-CANopen
Self-assembly female connector KIDA-5-67:
M12 x 1, suitable for encoder WDGA,
5-pin, IP67
Angular female connector
|
DETAILS
|
|
|
WDGA-36E-CANopen
Stub / Bus cable, M12 x 1,
suitable for encoder WDGA
Connector angular - cable- female connector angular
|
DETAILS
|
|
|
WDGA-36E-CANopen
Stub / Bus cable, M12 x 1,
suitable for encoder WDGA
Connector straigth - cable- female connector straigth
|
DETAILS
|
|
|
WDGA-36E-CANopen
2-port junction systems, T-junction, M12 x 1,
suitable for encoder WDGA
2 female connectors, 1 connector
|
DETAILS
|
|
|
WDGA-36E-CANopen
Termination resistor 120 Ohm, M12 x 1,
suitable for encoder WDGA
Connector
|
DETAILS
|
|
|
WDGA-36E-CANopen
Termination resistor 120 Ohm, M12 x 1
suitable for encoder WDGA
female connector
|
DETAILS
|
| Indicators and analysis equipment for absolute encoders WDGA |
|
|
WDGA-36E-CANopen
PEAK CAN-USB-Analyzer
for absolute encoder WDGA
|
DETAILS
|
|
|
WDGA-36E-CANopen
Torque support WDGDS10016
for hollow shaft encoder WDGA 36E.
|
DETAILS
|
|
|
For further information please contact our local distributor, please.
Here you find a list of our
distributors worldwide
|
|
|
|