deenfresitcntr
WDGA 36E CAN SAE J1939

Absolute encoder, magnetic, CAN SAE J1939 WDGA 36E
hollow bore (blind)
Housing: Ø 36 mm

16/32-bit Single-turn/Multi-turn;
Hollow bore (blind): Ø 6 mm, Ø 1/4"

Data sheet
Drehgeber WDGA36ESAEJ1939
Highlights
  • EnDra® Multiturn Technology: maintenance-free and environmentally friendly
  • CAN SAE J1939 protocol
  • Forward-looking technology with 32 Bit processor
  • 2-colour-LED as indicator for operating condition
Product details
Flange
hollow shaft (blind-bored)
Housing
Ø 36 mm
stainless steel
Resolution
Single-turn Resolution

65.536 steps/360° (16 bit)

Multi-turn Resolution

up to 32 bit

Shaft
Ø 6 mm
Insertion depth min.: 8 mm
Insertion depth max.: 17 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Ø 6.35 mm, Ø 1/4"
Insertion depth min.: 8 mm
Insertion depth max.: 17 mm
Max. Permissible shaft loading radial: 80 N
Max. Permissible shaft loading axial: 50 N
Max. operating speed
12000 rpm
Power supply
4,75 VDC up to 32 VDC
Current consumption: typ. 50 mA
Power consumption: max. 0.5 W
Operating temperature
-40 °C up to +85 °C
Storage temperature
-40 °C up to +100 °C
Protection class
Housing: IP65, IP67; shaft sealed: IP65; cable outlet L1: IP40
STEP viewer / STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
CB5axial, 5-pin, shield connected to encoder housing
Assignments
(+) Vcc2
GND3
CANHigh4
CANLow5
CANGND shield1
STEP viewer / STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
CC5radial, 5-pin, shield connected to encoder housing
Assignments
(+) Vcc2
GND3
CANHigh4
CANLow5
CANGND shield1
STEP viewer / STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
L1radial, shield connected to encoder housing (IP40)
Assignments
(+) VccBN
GNDWH
CANHighGN
CANLowYE
CANGND shieldshield
STEP viewer / STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
L2axial, shield connected to encoder housing
Assignments
(+) VccBN
GNDWH
CANHighGN
CANLowYE
CANGND shieldshield
STEP viewer / STEP data:

Your desired STEP file is not listed:
Request STEP file here

Description
L3radial, shield connected to encoder housing
Assignments
(+) VccBN
GNDWH
CANHighGN
CANLowYE
CANGND shieldshield
Motor feedback installation solutions
Motor feedback installation solutions with EnDra® Technology

...to be directly installed in motors.

Handout Absolute encoders WDGA
Handout Absolute encoders WDGA

  • Absolute encoders with flange Ø 36 mm / Ø 58 mm
  • Single-/Multiturn (16/43)
  • Ground-breaking technology 32 Bit processor
  • Very high shaft loading, IP67
  • EnDra® Multiturn technology: No gears, no battery
  • QuattroMag® Singleturn technology: High precision +/- 0,0878°

Short-Catalogue Encoders and systems
Short-Catalogue Encoders and systems

  • Incremental and absolute encoders
  • Digital shaft copying
  • Made in Germany
  • Motorfeedback
  • Position Measurement Systems

HALT Test
The HALT-Test

Delivery times and service
Delivery times and service

of Wachendorff Automation GmbH & Co. KG

Assembly instructions for WDGA absolute encoder SAE J1939
Assembly instructions for WDGA absolute encoder SAE J1939

EC Konformitätserklärung Drehgeber : EC declaration of conformity encoder
EU declaration of conformity absolute encoder WDGA 2.0 CAN/SSI

for Wachendorff Automation GmbH & Co. KG.

UKCA declaration of conformity absolute encoder WDGA 2.0 CAN/SSI
UKCA declaration of conformity absolute encoder WDGA 2.0 CAN/SSI

for Wachendorff Automation GmbH & Co. KG.

UL Certificates for Wachendorff Automation Products 2014-03-28
UL Certificates

for Wachendorff Automation products.

REACH regulation
REACH- and RoHS regulation of the EU

Information

ISO Zertifikat DIN EN 9001:2015
ISO Certificate DIN EN 9001:2015

WDGDS10016
WDGDS10016

Torque support WDGDS10016

for hollow shaft encoder WDGA 36E with hollow shaft (blind) Ø 6 mm.

Drehmomentstütze Federblech WDGDS10021
WDGDS10021

Torque support WDGDS10021

for hollow shaft encoder WDGA 36E with hollow shaft (blind) Ø 6 mm.

The encoder WDGA 36E CAN SAE J1939 is also available with fixed 120 Ohm terminating resistor.

distributors
For further information please contact our local distributor.
Here you find a list of our distributors worldwide
You want to get an offer or want a recall. Request