Wachendorff Automation encoders : WACHENDORFF AUTOMATION shaft encoder absolute shaft encoder CANopen LIFT WDGA58B Clamping flange; Housing: Ø 58 mm

Contact persons

Shaft encoders
incremental quadrature

Hollow shaft encoders
incremental quadrature

Encoders absolute

Encoders absolute, magnetic

-	Encoders absolute, CANopen

-	Encoders absolute, CANopen Lift

-	Encoders absolute, SSI

-	Encoders absolute, RS485

-	Encoders absolute, SAE J1939

Digital shaft copying

Measuring and
draw-wire systems

Encoder accessories

Trade fairs / Events

Operator panels OPUS

Industrial electronics

Code of Conduct

Encoders absolute

Absolute encoder WDGA CANopen EnDra (PDF 330 KB)

Absolute encoder WDGA SSI EnDra (PDF 571 KB)

WDGA 58B CANopen LIFT
Absolute shaft encoder, magnetic,
CANopen LIFT WDGA 58B
Clamping flange;
Housing: Ø 58 mm
14/18-bit Single-/Multiturn;
Shaft: Ø 10 mm;
Communication Profile according to CiA 301
Application Profile CANopen Lift CiA 417;
binary code

Data sheet (PDF 241 KB)

Highlights

EnDra®: maintenance-free and environmentally friendly
CANopen LIFT, Single- and Multiturn
Communication Profile according to CiA 301
Application Profile CANopen Lift CiA 417
Single-/Multiturn (14 bit / 40 bit)
Future-oriented technology with 32 Bit processor
2-colour-LED as indicator for operating condition and error message appropriate CiA 303-3
High shaft load up to 220 N radial, 120 N axial

Product details
Housing	steel case chrome-plated, magnetic shielding
Resolution	14 bit (18 bit multiturn)
Baud rate	max. 1 MBaud with automatic bit rate detection
Shaft	Ø 6 mm / Ø 10 mm
Max. operating speed	8,000 rpm
Permitted load on shaft end	120 N Fa 125 N Fr, Ø 6 mm / 220 N Fr, Ø 10 mm
Power supply	10 VDC up to 30 VDC max. 50 mA
Operating temperature	-40 °C up to + 80 °C
Storage temperature	-40 °C up to + 100 °C
Protection rating	IP67, shaft sealed to IP65

Indicators and analysis equipment for absolute encoders WDGA

WDGA 58B CANopen LIFT
Display Unit / and BCD Thumbwheel Switchset with CANopen Interface
The WDG043ACOM display units have been designed to display single parameters or registers (like position or speed) in systems using a CANopen network for comminication.

For absolute encoders female connectors / cable with female connector

WDGA 58B CANopen LIFT
Self-assembly connector KIS-5-67:
M12 x 1, suitable for encoder WDGA CANopen with connector CB5,
5-pin, IP67
Straigth connector

WDGA 58B CANopen LIFT
Self-assembly connector KISA-5-67:
M12 x 1, suitable for encoder WDGA CANopen with connector CB5,
5-pin, IP67
Angular connector

WDGA 58B CANopen LIFT
Self-assembly female connector KID-5-67:
M12 x 1, suitable for encoder WDGA CAnopen with connector CB5,
5-pin, IP67
Straigth female connector

WDGA 58B CANopen LIFT
Self-assembly female connector KIDA-5-67:
M12 x 1, suitable for encoder WDGA CAnopen with connector CB5,
5-pin, IP67
Angular female connector

WDGA 58B CANopen LIFT
Stub / Bus cable, M12 x 1,
suitable for encoder WDGA CANopen with connector CB5
Connector angular - cable- female connector angular

WDGA 58B CANopen LIFT
Stub / Bus cable, M12 x 1,
suitable for encoder WDGA CANopen with connector CB5
Connector straigth - cable- female connector straigth

WDGA 58B CANopen LIFT
2-port junction systems, T-junction, M12 x 1,
suitable for encoder WDGA CANopen with connector CB5
2 female connectors, 1 connector

WDGA 58B CANopen LIFT
2-port junction systems, Y-junction, M12 x 1,
suitable for encoder WDGA CANopen with connector CB5
2 female connectors, 1 connector

WDGA 58B CANopen LIFT
Termination resistor 120 Ohm, M12 x 1,
suitable for encoder WDGA CANopen with connector CB5
Connector

WDGA 58B CANopen LIFT
Termination resistor 120 Ohm, M12 x 1
suitable for encoder WDGA CANopen with connector CB5
female connector

Indicators and analysis equipment for absolute encoders WDGA

WDGA 58B CANopen LIFT
PEAK CAN-USB-Analyzer
for absolute encoder WDGA

Mounting accessories

WDGA 58B CANopen LIFT
Mounting angle MW58B
suitable for inkremental encoder WDG 58B, 58K, 58D, 58T and
absolute encoder WDGA 58B.

WDGA 58B CANopen LIFT
Square flange QF58B
suitable for incremental encoder WDG 58B and
absolute encoder WDGA 58B.

WDGA 58B CANopen LIFT
Clamping claw SP-3-00
suitable for incremental encoder WDG 58A, 58B, 58C, 58D, 58K, 63B and
absolute encoder WDGA 36A, WDGA 58A, WDGA 58B.

Couplings

WDGA 58B CANopen LIFT
Jointed coupling ST27
for encoder with shaft Ø 6 mm or 10 mm

WDGA 58B CANopen LIFT
Slit coupling PK20
for encoder with shaft Ø 6 mm.

WDGA 58B CANopen LIFT
Slit coupling PK24
for encoder with shaft Ø 6 mm, 8 mm or 10 mm.

WDGA 58B CANopen LIFT
Spring disc coupling FSK22
for encoder with shaft Ø 6 mm, 10 mm or 12 mm.

WDGA 58B CANopen LIFT
Helical coupling WK22
for encoder with shaft Ø 6 mm.

WDGA 58B CANopen LIFT
Helical coupling WK24
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm.

WDGA 58B CANopen LIFT
Helical coupling WK32
for encoder with shaft Ø 6 mm or 10 mm.

WDGA 58B CANopen LIFT
Bellows coupling BK29
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm*.
Max. offset of shafts radial: ± 0,25 mm or ± 0,30 mm*
Torsion spring stiffness: 150 Nm/rad or 130 Nm/rad*

WDGA 58B CANopen LIFT
Bellows coupling FB29B
for encoder with shaft Ø 4 mm, 6 mm, 8 mm, 10 mm or 12 mm.

WDGA 58B CANopen LIFT
Double loop coupling DSK29
for encoder with shaft Ø 6 mm, 8 mm or 10 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

WDGA 58B CANopen LIFT
Double loop coupling DSK38
for encoder with shaft Ø 6 mm, 8 mm, 10 mm or 12 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

WDGA 58B CANopen LIFT
Double loop coupling DSK48
for encoder with shaft Ø 10 mm, 12 mm or 14 mm.
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

WDGA 58B CANopen LIFT
Paguflex coupling PF26 type 10
for encoder with shaft Ø 6 mm or 8 mm.

WDGA 58B CANopen LIFT
Paguflex coupling type 20
for encoder with shaft Ø 10 mm or 12 mm.

For further information please contact our local distributor.

Here you find a list of our distributors worldwide

Wachendorff Automation GmbH & Co. KG - Industriestrasse 7 - D-65366 Geisenheim
wdg@wachendorff.de - Phone +49 6722 996525 - Fax +49 6722 996570